670
edits
Propane + Air Torch (Flamefast T4): Difference between revisions
From London Hackspace Wiki
m
Tweaked a bit
(Page creation and fill with basic content) |
m (Tweaked a bit) |
||
| Line 12: | Line 12: | ||
|maintainers=Toby Molyneux | |maintainers=Toby Molyneux | ||
}} | }} | ||
A large-scale torch intended primarily for brazing, but it can also be used for other heating tasks such as heat-treating or hot bending | A large-scale torch intended primarily for brazing, but it can also be used for other heating tasks such as heat-treating or hot bending. This is a heavy-duty torch, the lighter [[Torch, Propane (Sievert)|Sievert torch]] gives better control on small jobs and also does not require training | ||
The torch requires brief training before use and so is kept in the metalshop toolroom - please return it after use. Current trainer is Toby Molyneux ( | The torch requires brief training before use and so is kept in the metalshop toolroom - please return it after use. Current trainer is Toby Molyneux (HS32098) | ||
This torch works on a combination of propane gas and compressed air from the hackspace air compressor. Detailed instructions for safe setup will be given during training. The ideal pressure on the air regulator is about 0.8 bar although this should be adjusted to suit. | This torch works on a combination of propane gas and compressed air from the hackspace air compressor. Detailed instructions for safe setup will be given during training. The ideal pressure on the air regulator is about 0.8 bar although this should be adjusted to suit. | ||
