13
edits
Triton Thickness Planer: Difference between revisions
From London Hackspace Wiki
no edit summary
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
The mechanism has a tendancy to jam if used without chip extraction, for which the portable [[Equipment/Clarke Dust Extractor|portable dust extractor]] should be used | The mechanism has a tendancy to jam if used without chip extraction, for which the portable [[Equipment/Clarke Dust Extractor|portable dust extractor]] should be used | ||
Do not attempt to plane end grain (e.g. glued up cutting board) in this machine, they are very likely to break and fire back out of the machine | Do not attempt to plane end grain (e.g. glued up cutting board) in this machine, they are very likely to break and fire back out of the machine | ||
Do not attempt to plane short workpieces (less than around 250mm long) - they will be unsupported by the feed rollers during the middle of the cut so will spin and jam inside the machine | Do not attempt to plane short workpieces (less than around 250mm long) - they will be unsupported by the feed rollers during the middle of the cut so will spin and jam inside the machine | ||
