Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 09:57, 15 December 2010
, 15 December 2010→Logbook
mNo edit summary |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
==Logbook== | ==Logbook== | ||
===14/12/2010 Operator [[user:ciaran.mooney|Ciarán]]=== | |||
* Started up laser, cut x3 small key rings from 4 mm MDF with Duncan. Not a problem worked perfectly. | |||
* Later noticed when Glenn was cutting a lot of MDF that water heating up, and there was no return water coming from chiller. | |||
* Topped up water in reservoir with distilled water to the line, so that Glenn could finish. | |||
* Russ turned up and had a look. Seems that the pump supplying water to chiller worked when plugged into it's own power, but the chiller did not. | |||
* Russ reckons there is a leak. | |||
* Needs further looking at, probably best only to use the laser cutter for small jobs until it's sorted. | |||
===6/12/2010 Operator [[User:Solexious|Solexious]]=== | ===6/12/2010 Operator [[User:Solexious|Solexious]]=== | ||
* Connected CoolBot to the cooling system, seems to be working as expected, documentation to follow. | * Connected CoolBot to the cooling system, seems to be working as expected, documentation to follow. | ||
