Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 09:58, 15 December 2010
, 15 December 2010→14/12/2010 Operator Ciarán
| Line 7: | Line 7: | ||
* Later noticed when Glenn was cutting a lot of MDF that water heating up, and there was no return water coming from chiller. | * Later noticed when Glenn was cutting a lot of MDF that water heating up, and there was no return water coming from chiller. | ||
* Topped up water in reservoir with distilled water to the line, so that Glenn could finish. | * Topped up water in reservoir with distilled water to the line, so that Glenn could finish. | ||
* Russ turned up and had a look. Seems that the pump supplying water to chiller worked when plugged into it's own power | * Russ turned up and had a look. Seems that the pump supplying water to chiller worked fine when plugged into it's own power. Plugging the chiller into separate power didn't seem to do anything. | ||
* Russ reckons there is a | * Russ reckons there is a block. | ||
* Needs further looking at, probably best only to use the laser cutter for small jobs until it's sorted. | * Needs further looking at, probably best only to use the laser cutter for small jobs until it's sorted. | ||
