Equipment/HPC LS3060 Laser Cutter/LogBook: Difference between revisions
From London Hackspace Wiki
Equipment/HPC LS3060 Laser Cutter/LogBook (view source)
Revision as of 12:54, 3 January 2011
, 3 January 2011→Logbook
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
==Logbook== | ==Logbook== | ||
===3/1/2011=== | |||
*Went to test if it was Z-datum/alignemnt problem previously (see below), now it seems that the Layz0r shuttle PC does not want to power up. | |||
*Laser turns on, along with cooling equipment, and Monitor is in standby. Changed cable for the PC to check if the fuse was blown, didn't work. | |||
===31/12/2010 Operator [[user:ciaran.mooney|Ciarán]]=== | ===31/12/2010 Operator [[user:ciaran.mooney|Ciarán]]=== | ||
*Tried to cut 4mm MDF using reccomended settings (speed 4, 100%). Laser cutter unable to cut through. Tried again with Speed=3, two passes and hit the "Z-Datum" button combo, but still laser unable to cut. Gave up. | *Tried to cut 4mm MDF using reccomended settings (speed 4, 100%). Laser cutter unable to cut through. Tried again with Speed=3, two passes and hit the "Z-Datum" button combo, but still laser unable to cut. Gave up. | ||
