Equipment/Lattner: Difference between revisions
From London Hackspace Wiki
No edit summary |
|||
| Line 23: | Line 23: | ||
* 1U Rackmount server with 4 x 1000GB 3.5" SATA drives and one 2.5" 32GB Boot SSD | * 1U Rackmount server with 4 x 1000GB 3.5" SATA drives and one 2.5" 32GB Boot SSD | ||
* Debian 8 | * Dual Quad-Core Intel Xeon E5345 processors (2.33ghz) | ||
* Debian 8 Operating System with Official ZFS Extensions | |||
* Connected to [[Equipment/Cisco1]] via port 31 & 32 in a 2 port LACP channel bond. | * Connected to [[Equipment/Cisco1]] via port 31 & 32 in a 2 port LACP channel bond. | ||
* Runs Samba (workgroup 'LHS') and has 2 shares: | * Runs Samba (workgroup 'LHS') and has 2 shares: | ||
** space, which is read/write to everyone on the local network | ** space, which is read/write to everyone on the local network | ||
** managed which contains useful things that are of interest to hackspace members. | ** managed which contains useful things that are of interest to hackspace members. | ||
* shares /home over | * shares /home over NFS, currently used by [[lamarr]] at least. | ||
== Motherboard and Memory == | == Motherboard and Memory == | ||
Revision as of 14:22, 8 July 2016
| Lattner | |
|---|---|
 | |
| Model | SuperMicro X7DBU |
| Sub-category | Networking |
| Status | Good working order |
| Training requirement | no |
| Origin | mixed |
| Location | Basement rack |
| Maintainers | Sysadmin team |
Lattner is a general-purpose file server provided to help with general hackspace storage stuff. Note that no warranty is given or implied, but we will try our best to keep it reliably online and usable.
The system was named after the computer scientist Chris Lattner. Lattner is a software developer, best known as the main author of LLVM and related projects, such as the compiler Clang and the programming language Swift.
- 1U Rackmount server with 4 x 1000GB 3.5" SATA drives and one 2.5" 32GB Boot SSD
- Dual Quad-Core Intel Xeon E5345 processors (2.33ghz)
- Debian 8 Operating System with Official ZFS Extensions
- Connected to Equipment/Cisco1 via port 31 & 32 in a 2 port LACP channel bond.
- Runs Samba (workgroup 'LHS') and has 2 shares:
- space, which is read/write to everyone on the local network
- managed which contains useful things that are of interest to hackspace members.
- shares /home over NFS, currently used by lamarr at least.
Motherboard and Memory
Lattner has 32GB of ECC DRAM and is powered by a SuperMicro X7DBU motherboard. Possible management via IPMI is available via an off-board card that is currently NOT installed.
Disk Configuration
- 4 1TB drives connected directly to the motherboard SATA ports.
- System is using ZFS in a RAIDZ2 (Double-Parity) RAID providing 1800GiB of usable storage:
pool: chris state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM chris ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 ata-Hitachi_HUA721010KLA330_GTA060PBK2ZY1F ONLINE 0 0 0 ata-Hitachi_HUA721010KLA330_GTA060PBKEVKZF ONLINE 0 0 0 ata-Hitachi_HUA721010KLA330_GTA060PBKEWNTF ONLINE 0 0 0 ata-Hitachi_HUA721010KLA330_GTA060PBKEWX4F ONLINE 0 0 0
- zpool was created using device-aware /dev/disk/by-id rather than generic /dev/sda,sdb,sdc,sdd enumeration to help facilitate disk replacements when a drive goes down. And by labeling the outside of the drive-tray with the disk serial number, we can easily reconcile the serial number of a failed/failing drive with one that is in the array.
- Boot drive is simply a single SSD - it shouldn't hold anything precious nor be used as a caching device as there is sufficient system memory and ZFS can likely manage caching automatically.
