|
|
| (70 intermediate revisions by 23 users not shown) |
| Line 1: |
Line 1: |
| We have a [http://www.makerbot.com Makerbot Cupcake] (batch 9, #402)! It's cool.
| | {{EquipmentInfobox |
| | |name=Makerbot Cupcake<!-- Name of the item. --> |
| | |image=1.jpg <!-- Image of the item. Leave with placeholder image if none exists. --> |
| | |model=Unknown <!-- Model --> |
| | |category=Equipment <!-- Main category. Please leave alone to keep item in this category --> |
| | |subcat=Scrapped |
| | |status=Scrapped |
| | |consumables=Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. --> |
| | |accessories=Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. --> |
| | |reqtraining=Yes<!-- Is training required to use this equipment? Yes or no. --> |
| | |trainlink=Unknown <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. --> |
| | |acnode=<!-- Is the equipment ACnode locked? --> |
| | |owner=Unknown <!-- Provide a link to owners members page if other than LHS --> |
| | |origin=Unknown <!-- If via pledge, please link to the completed pledge page on the wiki --> |
| | |location=<!-- Floor, room/zone and location within that area --> |
| | |maintainers=<!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. --> |
| | |template_ver=1.1 <!-- Please do not change. Used for tracking out-of-date templates --> |
| | }} |
| | [[File:Makerbot-1.jpg|thumb|right]] |
| | [[File:Makerbot-2.jpg|thumb|right]] |
| | == '''<div style="color:red">Please don't touch or fiddle with the Makerbot unless you have been trained. </div>'''== |
| | Training Session 1: Wed 7th September @12:30pm [[User:Samthetechie|Samthetechie]] showed [[User:Billy_Smith|Billy Smith]] |
| | == '''<div style="color:red">DO NOT UPDATE OR EDIT THE FIRMWARE ON THE BOARDS. </div>'''== |
| | Please document the customizations which prevent upgrading the firmware <3 |
| | ==Status== |
| | To try to reduce the stagering amount of damage the Makerbot sustains I've added a key. |
| | [[Equipment/Makerbot_Cupcake/LogBook|operator log]] for more information. |
|
| |
|
| If you haven't used it before, please contact Glen or Russ and get him to show you [[makerbot notes|how it works]]
| | ==Model== |
| | We have a [http://www.makerbot.com Makerbot Cupcake] (batch 9, #402)! Now modified to a hipsterbot, extended x, y, z-axis. It's to cool. |
| | ====Specification==== |
|
| |
|
| If you're using the Makerbot and have issues with it, or have to do maintenance/modifications to it, please note them in the logbook below. This lets other users know what the state of the machine is. | | ==Instructions== |
| | If you haven't used it before, please contact Glen or Russ and get him to show you how it works. |
|
| |
|
| Drivers for USB-serial cable: [http://www.ftdichip.com/FTDrivers.htm]
| | If you're using the Makerbot and have issues with it, or have to do maintenance/modifications to it, please note them in the [[Equipment/Makerbot_Cupcake/LogBook|operator log]]. This lets other users know what the state of the machine is, and helps us to avoid repeating errors which lead to breakage. |
|
| |
|
| ==Logbook== | | ====Calibration==== |
| | * [http://wiki.makerbot.com/configuring-skeinforge Makerbot Wiki - Configuring skeinforge] |
|
| |
|
| ===10/08/2010 Operator: Oni (and Russ!)=== | | ====Connection voodoo==== |
| | #USB cable maker bot |
| | #USB cable laptop |
| | #Makerbot PSU power on |
| | #Use key to turn power on to system |
| | #~RepRap motherboard power on |
| | #replicatorg |
|
| |
|
| * Walked in, warmed up build platform and extruder. Both reached required temperature
| | ====Temperature settings==== |
| * Tested extrusion which failed. Attempted to use the motor to pass through the feed. This failed.
| |
| * Attempted to reverse the motor and feed the plastic back out of the extruder. This worked for about 1cm then stopped. Considerable pressure with pliers would not remove it
| |
|
| |
|
| ===07/08/2010 Operator: Russ===
| | ABS melts at 220 °C. |
| * We found the bag of spare parts in Tom Scott's box. It's now on the table.
| | PLA melts at 210 °C |
| * Extruder pinchweel was too loose. There's a silvery piece of metal with a little masking tape flag on top in the parts bag which should be used as a spacer to adjust it. Position of the feed reel should not be a problem - the extruder has tipped the makerbot over once before! Tangling of the feedstock is more of a problem.
| |
| * The current - major - problem with printing is oozebane (same as back when I last used it). This is an interaction between skeinforge's software oozebane and the Makerbot hardware oozebane.
| |
| * Tried to print a hollow triangular pyramid for MattP, completely failed due to oozebane.
| |
| * I am working on a new all-steel extruder hot end (http://www.thingiverse.com/thing:3452)
| |
|
| |
|
| ===06/08/2010 to 07/08/2010 Operator: [[user:samthetechie|samthetechie]] + [[user:Lambda25|Kal]]===
| | Use ReplicatorG 0025, setting the Machine driver the "Cupcake w/ automated build platform", but the Gcode profile set to "Cupcake w/ heated build platform" (for now, because we don't have a scrubber). |
|
| |
|
| Total rebuild of Extruder:
| | The heated build platform should be set to 100-120 °C, and shows up in GCode as the "cooling fan". If controlling the extruder, set it to 255. |
| * Removed all previous Kapton and thermal insulation.
| |
| * Nichrome wire re-soldered and rewound
| |
| * Thermistor replaced (direct contact with metal and seated in a groove made with a hacksaw)
| |
| ** re-soldered and insulated with Kapton tape.
| |
| * Replaced PTFE section with a brand new piece made in the tool shop. Design was modified to make a tight seal ---> no more splurging.
| |
| * Inverted the round plastic (Printed) plate which connects extruder head to extruder body. This allows for a tighter fit.
| |
| * Reinstalled the extruder.
| |
| * Purged nozzle to remove any burnt residue.
| |
|
| |
|
| Printing of parts:
| | The PTFE Barrel insulates the extruder nozzle |
| | *PTFE is a thermoplastic polymer. Its melting point is 327 °C, but its properties degrade above 260 °C |
|
| |
|
| * Printed first part : frame vertex from mendel reprap. | | The default "3mm" thermistor settings are as follows: |
| * Printed second part: space invader 7 from thingyverse. | | *Temperature of Raft: 230.0 |
| * Adjusted printing bed with spirit level and masking tape. | | *Temperature of Shape First Layer Outline: 215.0 |
| * Printed third part: hackspace entry emblem. | | *Temperature of Shape First Layer Within: 215.0 |
| | *Temperature of Shape Next Layers: 220.0 |
|
| |
|
| Current state:
| | Yup, that should defo do the trick! |
|
| |
|
| * Extruder in perfect working order so doesn't need to be touched at all.
| | ==Consumables== |
| * Heated bed still needs adjusting to perfect the printing accuracy
| |
| * At the very least we need to start using the z-axis endstop to remove user error and improve work flow of multiple parts.
| |
|
| |
|
| Task for future:
| | I've bought plastic, lots of plastic. |
|
| |
|
| * PLA reel must be placed above the makerbot to improve feeding as there where a few issues
| | ABS |
| * A drying oven for the PLA must be constructed/purchased to GREATLY improve the print quality (I can explain why if you ask) -- because of [http://blog.makerbot.com/2010/03/01/plastic-management-101/ this]?
| | Black, white, clear, red, yellow, pink green & blue. |
| * The feeding mechanism has some issue of not feeding properly every now and then. There is a small snapped part caught inside the feeding assembly that needs to be sorted but is ok for the moment.
| |
|
| |
|
| ===6/08/2010 Operator: Glen ===
| | PLA |
| * Why is the Makerbot in bits and where are all of it's nuts and bolts going? We really should replace missing bolts.
| | Clear, green, white and metallic. |
| * I cleared the blockage out from the extruider.
| |
| * The print head heating coil resistance should be 7 ohms, it's infinity, which means that there's a problem with the nicrome wire.
| |
|
| |
|
| ===4/08/2010 Operator: [[user:samthetechie|samthetechie]] + [[user:Lambda25|Kal]]===
| | Prices range from 4 to 2.5 pence per gram. |
| * checking axis alignment with spirit level, [Done]
| | Put money for plastic used in the box marked Glen in the box store room. |
| * making notes about suggested fixes/troubleshoot
| |
| **1.Needs another piece of u-shaped wood on underside of perspex extruder platform to stop the nut disengaging from the platform x4
| |
| **2. Purge print head
| |
| **3. Improve insulation around extruder nozzle. Then recalibrate nozzle.
| |
|
| |
|
| * Need to get in touch with people that made/worked on this makerbot
| | ==More information== |
| | Glen's notes on conversion to RAMPS [http://groups.google.com/group/london-hack-space/browse_thread/thread/4fa699826c0c3506] |
|
| |
|
| '''Current state :'''
| | ====Software==== |
| | * [http://www.ftdichip.com/FTDrivers.htm Drivers] for USB-serial cable (also [http://www.ftdichip.com/Drivers/VCP.htm here]). |
| | * skeinforge |
| | * http://replicat.org/ |
|
| |
|
| *Extruder head removed and cleaned. Not reattached as it needs work (see below) | | ====Communities==== |
| **On observation it requires a rebuild to stop leakage. | | *[http://www.fabathome.org/wiki/index.php?title=Main_Page Fab @ Home] |
| **Another round metal plate needs to replace the printed part as it has creeped, causing the leaking and general issues. | | *http://fabacademy.org |
| **silicone sealant maybe useful ( Good thermal resistance and easily available)
| | *http://www.thingiverse.com/ |
|
| |
|
| *Better insulation solution required as all the horrible glass mat stuff was removed during cleaning process. | | ====Instructions==== |
| | *[http://wiki.makerbot.com/how-to-print How To Print: an overview of turning a thought into an object] |
|
| |
|
| *Perhaps replace the current brushed DC extruder motor with a proper stepper motor
| | [[Category:Equipment]] |
| | |
| ===31/05/2010 Operator: Glen===
| |
| * Added new macro-scale thermistor to the print head. The last sub millimetre one fell apart.
| |
| * The PSU wasn't heating the bed and the print head. A glass cloth insulator was added to the bed and around the extruder.
| |
| * Glen printed two medium sized objects with PLA.
| |
| * Solexious fixed the build platform and X axis
| |
| * it's still spooging plastic from the side of the print head. Glue, tighter threads and jubilee-clips have been tried.
| |
| | |
| ===15/05/2010 Operator: Nandish===
| |
| *connection/on-off voodoo & preheating with no problem
| |
| *print not started, concerned that metal extruder barrel looks much further out the PTFE Barrel than on the [http://makerblock.com/2010/02/how-to-unclog-your-extruder-barrel-and-nozzle/ assembly instruction]
| |
| **update 17/05/2010: spoke to Russ, this is not normal - replacement part is required
| |
| * [[File:2010-05-16 15.28.31.jpg]]
| |
| | |
| ===03/05/2010 Operator: Jasper===
| |
| * printed the bus pirate box for real this time (after a bit more trial and error)
| |
| * the X axis stepper motor was backwards so swapped the connector around, now things won't be mirrored.
| |
| * [[File:Buspiratebox.jpeg]]
| |
| | |
| ===27/04/2010 Operator: Russ (write up by jasper)===
| |
| * [[JasperWallace]] printed a box for a [[BusPirate]], discovering that printed things shrink by 0.5% to 0.75%
| |
| | |
| ===19/04/2010 Operator: Russ===
| |
| * Motherboard + Extruder firmware to v2.0 release 1. HBP now internally powered.
| |
| | |
| ===18/04/2010 Operator: Nandish===
| |
| * was unable to find SDCard reader - printed via USB
| |
| * multiple failed prints at raft lay down
| |
| ** unconnected HBP cables lifted plate while it moved warping the raft
| |
| ** abs not adhering to HBP - maybe extrusion temp
| |
| ** extruder ploughing up cleanly laid down raft in one corner and printing in mid-air at other
| |
| * resolved raft issues with calibration
| |
| * partially successful print aborted after abs feed caught on speakers
| |
| ** several layers missed, extrusion resumed in mid-air, print aborted
| |
| | |
| ===13/04/2010 Operator: Russ===
| |
| * Installed heated build platform v2, externally powered.
| |
| | |
| ===29/03/2010 Operator: Solexious===
| |
| * First attempt, extruder was to close to the platform resulting in the abs being 'threaded'. After heating the extruder and manually feeding the abs the makerbot was back in working order.
| |
| * The makerbot successfully printed a single, and a 2X2 grid of Hackspace Coins http://www.thingiverse.com/thing:2113
| |
| | |
| ===29/03/2010 Operator: Russ===
| |
| * After a couple more crashes, downgraded extruder to 1.5.
| |
| | |
| ===16/03/2010 Operator: Russ===
| |
| * Ambient temperature is quite a bit warmer now, which probably helps.
| |
| * Successfully printed a whistle! (the overhang on the top means it's not terribly functional but it finished)
| |
| * Across about 70mins of print time I had two crashes :/
| |
| | |
| ===11/03/2010 Operator: Russ===
| |
| * Received and fitted new insulator/barrel/nozzle/nichrome. Extruder is working much better now.
| |
| * Also received 5lbs of PLA. I don't want to use it until we've done the M8 nut mod to the extruder, and we've got a spare insulator retainer. So we're still on ABS.
| |
| * Upgraded motherboard to 1.5, extruder to 1.8 with heated build surface. My ReplicatorG is now 0013.
| |
| * Managed to successfully print an insulator retainer! It's a bit stringy but it's a start.
| |
| * I'm wondering if the thermistor is a way off. Fiddling with the thermistor calibration didn't get very far.
| |
| * I honestly think we're nearly there ;)
| |
| | |
| ===02/03/2010 Operator: Russ===
| |
| * Filament drive pulley replaced. We now have 4 spares.
| |
| * Still hitting problems where the filament drive stopped and gouged a hole in the pulley, which seems to indicate barrel undertemperature or blockage.
| |
| * Tried increasing temperature. Increasing extruder temperature above 255 appears to cause the heater to run away. I melted the insulator. Silly me.
| |
| * Ordered new insulator+barrel+nozzle+nichrome.
| |
| | |
| ===11/02/2010 Operator; Glen===
| |
| * To print warp free large objects heat the perspex plastic bed to 100'C with the hot air blower then make sure the first two base layers are stuck to the bed by adjusting the Z-axis height. Don't use the electric fan heater as this increases cooling of the plastic. I used the hot air de-soldering blower at 100'C to keep the plastic warm while printing, though I didn't try printing without this.
| |
| * The extruder gear wheel has a part missing from it that limits where the plastic feed can rest against the gear teeth. Until the drive gear is replaced the plastic feed can work it's way next to the idler wheel where it will no longer be driven. I tried putting two idler wheels in to stop the feed from having any space to get away from the drive gear, but this didn't work so I went home.
| |
| * Consider selling the printer to some poor fool on eBay, as far as I know it's printed no large objects despite receiving dozens of hours of maintenance and is clearly possessed by angry spirits.
| |
| | |
| ===09/02/2010 Operator: Russ===
| |
| * Extruder with 2 idler wheels doesn't appear to work at all.
| |
| * Reassembled the extruder with one idler wheel, moving the drive wheel up the shaft a little.
| |
| * This works, but the extruder stalls after a random amount of time! WTF. We need a new drive wheel.
| |
| | |
| ===08/02/2010 Operator: Glen===
| |
| * Can printed half a large object with no warping by melting the raft to the print surface.
| |
| * Print-head failed push plastic feed into nozzle
| |
| * Dismantled the print-head and found the gear that drives the plastic feed stock had broken in two and the two parts had ground against each other to produce many tiny metal shards.
| |
| * After cleaning the print-head the plastic would not come through unless pushed by hand.
| |
|
| |
| ===06/02/2010 Operator: Russ===
| |
| * Downgraded both motherboard and extruder to 1.5 firmware.
| |
| * Printing off SD card, no crashes observed.
| |
| * Managed to get about 80% of a shot glass printed. Glitches caused by contraction were an issue, and eventually it got knocked off by the print head.
| |
| * I'm fairly sure the hardware is working fine. Problems I'm now seeing are caused by either ambient temperature/airflow or skeinforge settings.
| |
| | |
| ===04/02/2010 Operator: Russ===
| |
| * Walked in, started it up, extruder works fine.
| |
| * Extruder idler pulley needed re-adjusting twice. ('''Note:''' that the thin silvery metal bar in the Makerbot toolkit is designed to be used as a spacer for this.) Should be done up nice and tight now though.
| |
| * Continual tweaking of z-stage stepper strength, now at about 75%
| |
| * Accidental Z-stage/build platform collision required re-levelling of Z-stage (seems the best way to do this is by releasing one of the Z idler pulleys and twisting the studding, instead of fiddling with the nuts). Seems pretty smooth now.
| |
| * X belt tension was too low, there was a lot of slop. It's pretty tricky to get it tight enough.
| |
| * Lots of bolts on the XY stage were loose! This makes a horrendous racket when it's actually printing at full speed... Tightened them up
| |
| * Packed both X runner bars with hot glue, they were also moving about and making a racket.
| |
| * I managed to make it print 1/3rd of a shot glass, then it crashed. (About 60,000 gcode commands/30mins in.) Need to know what firmware to put on it to stop the crashing.
| |
| | |
| Following changes over skeinforge 0006 defaults are active (on my laptop):
| |
| | |
| Feedrate: 27.0 mm/s
| |
| Base Layer Thickness over Layer Thickness: 1.5
| |
| Interface Layer Thickness over Layer Thickness: 0.8
| |
