Lulzbot Mini Flexystuder: Difference between revisions
m (Updated the tool status to point to the tools status website.) |
(temporarily fitted with standard Lulzbot extruder) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 14: | Line 14: | ||
|origin=Donation from Lulzbot | |origin=Donation from Lulzbot | ||
|location=3D printer area, Ground floor | |location=3D printer area, Ground floor | ||
|maintainers= | |maintainers=tgreer, Welshie | ||
}} | }} | ||
=== Crump === | === Crump === | ||
[[Crump]] is a Lulzbot Mini Flexystuder. <br /> | [[Crump]] is a Lulzbot Mini that is normally fitted with a Flexystuder. <br /> | ||
While the flexystruder is having problems and we are preparing a replacement aerostruder, it has been fitted with a standard Lulzbot extruder for rigid filament. Ninjaflex can't be used in it at the moment, though this will change when we have the new Aerostruder installed. | |||
Accessible via http://crump from inside the hackspace network. | Accessible via http://crump from inside the hackspace network. | ||
==== Filament ==== | ==== Filament ==== | ||
Only use the provided | Only use the provided filament. Use the correct slicing profile for the filament in use. | ||
= Cost = | = Cost = | ||
Latest revision as of 13:44, 11 August 2019
| Lulzbot 2 (Crump) | |
|---|---|
 | |
| Model | Lulzbot Mini Flexystuder |
| Sub-category | CNC |
| Status | Check the Tools Status Page |
| Consumables | Ninjaflex filament |
| Accessories | Print removal knife, Pritt stick |
| Training requirement | yes |
| Training link | https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training |
| ACnode | yes |
| Owner | Hackspace |
| Origin | Donation from Lulzbot |
| Location | 3D printer area, Ground floor |
| Maintainers | tgreer, Welshie |
Crump
Crump is a Lulzbot Mini that is normally fitted with a Flexystuder.
While the flexystruder is having problems and we are preparing a replacement aerostruder, it has been fitted with a standard Lulzbot extruder for rigid filament. Ninjaflex can't be used in it at the moment, though this will change when we have the new Aerostruder installed.
Accessible via http://crump from inside the hackspace network.
Filament
Only use the provided filament. Use the correct slicing profile for the filament in use.
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1
