Triton Thickness Planer

Thickness Planer (Triton)
Model	Unknown
Sub-category	Woodworking
Status	Good working order
Last updated	6 September 2024 08:23:27
Training requirement	yes
ACnode	no
Location	Wood shop
Maintainers	Woodshop team

A thickness planer used to get 2 surfaces of a board parallel and then reduce them to a controlled thickness

No training requirement, but please seek advice from other woodshop users if you are unfamiliar with its use

Often used in conjunction with the surface planer which makes the initial flat surface on one face of the board

The mechanism has a tendancy to jam if used without chip extraction, for which the portable portable dust extractor should be used

Do not attempt to plane end grain (e.g. glued up cutting board) in this machine, they are very likely to break and fire back out of the machine

Do not attempt to plane short workpieces (less than around 250mm long) - they will be unsupported by the feed rollers during the middle of the cut so will spin and jam inside the machine

Risk Assessment - Wood Planers

This risk assessment is intended to provide guidance on the risk associated with the above equipment and activities in normal use. Please also check general risk assessments for the space as a whole. Any discrepancies, errors or concerns should be raised with the document maintainers or trustees - do not edit this assessment directly. For responsible persons and last update, see 'version log' of the assessment page.

Activity

Use of handheld or stationary wood planing equipment such as handheld planers, bench planers (aka jointers) or thickness planers

Signage

• 
• 
• 
• 
• 
• 
• 
• 
• 

Understanding Risk Rating

LOW - Ensure current control measures are in place and continue with activity

MED - Control measures may be adequate, co-supervision is recommended

HIGH - Do not undertake activity without further consultation with area specialists

Risk Assessment

Identify Hazards	Who May be Harmed and How	Severity	Control Measures	Likelihood	Risk Rating
Incompetent user	User, bystander	HIGH	Members must not use tools that they are not competent to use. Members must challenge use that they believe is dangerous. Members must read the user manual for this tool. Members must read the risk assessment before using a tool. Members will be advised during induction which tools they will need supervision or an induction to use. Only authorised members will complete maintenance and calibration tasks.	LOW	MED
Contact with rotary knives	User	HIGH	Do not put hands within 10cm of blade. Do not push workpiece over blade with hands. Use a push block to push workpiece over cutting area. Use guard to cover unused cutting area. Use guard to cover entire cutting area when thicknesser is being used. Do not insert hands into thicknesser when machine is plugged in. Planer should be turned off immediately after use.	MEDIUM	MED
Drawing in (being pulled into the drum)	User	HIGH	User of the thicknesser/planer should not wear gloves, ties, scarves, or other long flowy clothing that could get pulled into the blade. Do not move hands past the blade. Do not use the machine on short stock.	LOW	MED
Dust (inhalation, fire, explosion)	User, bystander	MEDIUM	Stationary machines must be used with the workshop dust extractor. An extraction hose must be attached to the machine’s extraction hood, which must be positioned appropriately for use with the thicknesser or planer. Maintenance must include the cleaning of dust from within the unit housing where accessible. Check the extraction hood periodically for blockages. A respirator or mask should be used whilst operating this tool for prolonged periods.	LOW	LOW
Noise	User, bystander	MEDIUM	Ear protection is advised.	LOW	LOW
Flying splinters	User, bystander	HIGH	Eye protection must be worn In the workshop. Only cut wood, ensuring the workpiece is free from nails, screws or other objects.	LOW	MED
Lifting heavy object	User	MEDIUM	The machine must be lifted into a stable position on the working area using correct manual handling procedures.	LOW	LOW
Electrocution	User, bystander	HIGH	Do not use if any damage to plug, cables, or machine.	LOW	MED