Equipment/Colin: Difference between revisions
From London Hackspace Wiki
m (Link to RocketRAID 2680SGL PCI-E to SAS Controller manual) |
(Mention maximum supported amount) |
||
| Line 25: | Line 25: | ||
** managed which contains useful things that are of interest to hackspace members. | ** managed which contains useful things that are of interest to hackspace members. | ||
== | == RAM Links == | ||
* http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5WD2%20Premium/P5WD2_Premium_QVL.pdf | * http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5WD2%20Premium/P5WD2_Premium_QVL.pdf | ||
* http://www.crucial.com/uk/store/listparts.aspx?model=P5WD2%20Premium&Cat=RAM | * http://www.crucial.com/uk/store/listparts.aspx?model=P5WD2%20Premium&Cat=RAM | ||
* http://www.asus.com/Motherboards/P5WD2_Premium/#specifications | * http://www.asus.com/Motherboards/P5WD2_Premium/#specifications | ||
According to [[http://www.asus.com/Motherboards/P5WD2_Premium/specifications/ motherboard spec]] it supports 4 x 240-pin DIMM sockets support max. 8GB DDR2 800/ 667/ 533 ECC and non-ECC memory | |||
The working 1G stick was: | The working 1G stick was: | ||
Revision as of 12:58, 28 May 2014
| Colin | |
|---|---|
 | |
| Model | Asus P5WD2 Premium |
| Sub-category | Networking |
| Status | Good working order |
| Training requirement | no |
| Origin | mixed |
| Location | Basement rack |
| Maintainers | Sysadmin team |
- 3U (?) rackmount server with 12 x 500Gb 3.5in SATA drives.
- Debian 7
- Connected to Equipment/Cisco1 via port 35 & 36 in a 2 port LACP channel thing.
- Runs samba (workgroup 'LHS') and has 2 shares:
- space, which is read/write to everyone on the local network
- managed which contains useful things that are of interest to hackspace members.
RAM Links
- http://dlcdnet.asus.com/pub/ASUS/mb/socket775/P5WD2%20Premium/P5WD2_Premium_QVL.pdf
- http://www.crucial.com/uk/store/listparts.aspx?model=P5WD2%20Premium&Cat=RAM
- http://www.asus.com/Motherboards/P5WD2_Premium/#specifications
According to [motherboard spec] it supports 4 x 240-pin DIMM sockets support max. 8GB DDR2 800/ 667/ 533 ECC and non-ECC memory
The working 1G stick was:
1GB Module - DDR2 800MHz
Part Number: KVR800D2N6/1G (Discontinued)
Specs: DDR2, 800MHz, Non-ECC, CL6, 1.8V, Unbuffered, DIMM,
Disk Configuration
- 4 of the drives are on the internal SATA ports
- 8 are on a HighPoint Technologies rocket raid 2680 via 2 SFF (?) cables
RocketRAID 2680SGL PCI-E to SAS Controller
Open source Linux drivers
Fetch sources from driver page on HighPoint website
Follow instructions on README
If kernel updates break the driver, the existing version of drivers can be rebuilt with:
bash /usr/share/hptdrv/rr2680/dist/hptdrv-rebuild
bash /usr/share/hptdrv/rr2680/dist/hptdrv-update
Card should alway be jumpered for PCI-E 4x (J7 pins 2-3)
If the card is not being detected / ROM is not showing during POST, check jumper configuration
