Archive:ServerHardwareAuction

For context see User:Martind/LfmHardwareAuction.

Help Needed

(last updated Wed 19 Jan)

If you would like to help out with any of the below contact martind, roberthl or Jasperw. Most of these tasks don't really require any particular skills, we can show you how it's done.

• coordinate eBay auctions
  • Robert/martind/Russss have access to the Ebay account, and TurboLister
• dispatch sold servers
  • Need more packaging! Getting bids from all over the country.
• review servers that didn't boot, fix where possible
• prep more servers for auction (get caddies from drives; attach rack mounts)
  • then take photos of prepped servers
• figure out how to catalogue 2-300 hard drives of misc makes and sizes (incl. smart status if easily possible)
  • (Axel started a script, still discussing options to speed this up. Script is in ~/lhs-auction-scripts/ on netbootboxxy)
• assess the box of "maybe dead" hard drives (smart status, stress test etc.)

Switches

• 2 x HP Procurve 2824 (J4904A) running firmware version I.10.32

Current firmware version is I.10.77:

http://h10146.www1.hp.com/customercare/support/software/switches.htm#2800

http://h10146.www1.hp.com/customercare/support/software/summarypages/i-j4903-c.htm

9600 8N1 for the serial

The one that I (User:JasperWallace) am using for netbooting stuff will have 'hackspace' as every password.

It will be on network range 10.192.38.0/24, it will be 10.192.38.1, it has unrestricted snmp access on the public community.

NetBoot Server

It's 'C1'.

running debian 5.0.6

• eth0 - unused (single socket)
• eth1 is on the hackspace lan and is 172.31.24.164 (assumes dhcp is stable!) (right hand of double socket when viewed from the back)
• eth2 is on the netboot lan, 10.192.38.2 (left hand, yellow cable atm).

• 9600 8N1 on both serial ports.
• password is hackspace

See LfmHardwareAuction/NetBootServer for more details

Drives

All drives need to be cleared with dban before we do anything else. This is almost done.

Internal drives

Make	Capacity	Interface	RPM	Quantity	Model
Hitachi	73	SCA	10000	63
Hitachi	36	SCA	10000	2
Seagate	35	SCA		5	ST336607LC
Maxtor	35	SCA	10000	4	Atlas 10k IV
Fujitsu	70	SCA		23	MAW3073NC
HP	9.1	SCA		1	D489-600002
HP	4.2	SCA		2	D3583C
Maxtor	160	SATA		6	6L160MO
Western Digital	400	SATA		12	DiamondMax10
Seagate	750	SATA		2	Baracuda ES
Seagate	400	SATA		25	Baracuda ES
Seagate	80	SATA		1	Baracuda 7200.1
Hitachi	164.7	SATA		4	Deskstar
Hitachi	82.3	SATA		3	Deskstar
Hitachi	250	SATA		10	Deskstar
Maxtor	250	SATA		6	DiamondMax10
Maxtor	80	SATA		1	diamondMax plus 9
Maxtor	500	SATA		1	diamondMax 22

External Drives

artag has 3 at home.

label = does it have a lastfm sticker/label on the spine of then case

capacity = 4 = 400gb, 7 = 750gb.

num	label?	works?	capacity	dban?
1	y	y	4
1	n	y	7
2	y	y	4
2	n	y	7	y
3	n	y	7
4	n	y	7
5	y	y	4
5	n	y	7	y
6	y	y	7	y
6	n	y	7	y
7	y	y	4
8	y	y	4
8	n	y	7	y

Todo

• dban external drives (needs us power adapter)
• dban last few drives

http://sg.danny.cz/sg/sg3_utils.html

Howto

Better descriptions to follow.

 <Jasperw>	go to desk
 <Jasperw>	look at monitor
 <Jasperw>	trace monitor cable
 <Jasperw>	switch attached machine off
 <Jasperw>	remove all drives from machine
 <Jasperw>	put drives in one of the 'done' boxes. NOT the dead drive box (unless the drives are dead)
 <Jasperw>	if drives have long thin connector (SCA SCSI) then leave machine off and go back to whatever you where doing (We're pretty much done with the SCa ones).
 <Jasperw>	of they have a sata connector then find some more sata drives on the shelves (not in the boxes).
 <Jasperw>	plug 4 x drives into machine.

<SpikeUK>	Jasperw - I've found three drives kicking about on shelf - can you direct me to another likely source please?
<Jasperw>	SCA or SATA?
 <Jasperw>	there should be more drives on the shelves, you just have to look around.
 <SpikeUK>	S
 <SpikeUK>	Jasperw - sorry SATA
 <Jasperw>	you might need to remove them from one of the other types of caddy.
 <SpikeUK>	Jasperw - OK
 <Jasperw>	and put them into whatever is the right caddy type for the machine thats free for wipeing.#

<SpikeUK>	Jasperw - machine is now fitted with four new drives (in same slots that others came from)
<Jasperw>	ok, power it on and, depending on what machine type it is, you'll need to work out how to get into the raid controller setup and configure the drives as single disks or JBOD.
 <martind>	SpikeUK: is it a machine in the left or right-hand rack?
 <SpikeUK>	martind - right hand rack
 <martind>	alt+3 to start RAID setup during boot
 <martind>	then clear all 
 <martind>	(select all disks, then "clear")
 <martind>	then set up new ones
 <martind>	one by one
 <martind>	select spare disk, "create", which takes you to an "accept" screen
 <martind>	four times
 <martind>	then f8 to finish & reboot 

<SpikeUK>	martind - ok machine rebooting. Only 3 o4 4 drives was recognised. What do I want to boot into?
 <martind>	SpikeUK: may be worth investigating the dead drive
 <martind>	e.g. check the LEDs
 <Jasperw>	dban autonuke on the netboot menu

Etc

On IRC:

Olfin>	Are there any plans to harvest the rare earth metal magnets from the dead drives? THey're rather useful!

Yes, and keeping the aluminium shells for melting and casting purposes would be good as well.

Servers

Howto

All servers have been assigned a hardware class, based on their type. (Double-check when you process a machine.) That way we only have to document the basic hardware once.

1. open machine, check that is has
   • ram
   • sata cables (some machines have had the sata cables removed)
   • and that all (or at least some) of the drive bays connected (some machines have had their controller card removed so they won't talk to any drives!)
2. if all is ok connect up the machine and boot it.

Test that it all works

1. Run dban with drives in all slots to ensure they're connected and functional
2. Run a ram test (how? need to find good software)
3. Test all ports (VGA, USB, PS/2, Ethernet, ...)
4. Test the CD drive, if applicable

To determine hardware spec:

1. Plug in monitor & keyboard
2. Boot up, ensure it netboots into "DISKLESS Debian" (the default option) and wait until it shows a prompt
3. Make a note of server ID (the label we put on each server) and MAC address (shown just above the login prompt) and put them both in the Hardware List below

All hardware info files are automatically collected at http://hack.rs/~martind/records/?C=M;O=D (aka http://172.31.24.164/records/?C=M;O=D), one set of files per MAC address (this link shows newest first)

Server classes

Template: ServerClassTemplate

• A
• B
• C
• D
• E
• F
• G
• H
• I
• J
• K
• L
• M
• N
• O
• P
• Q
• R

Hardware List

Template: ServerTemplate (mostly for manual comments, since hardware info can now be gathered automatically.)

Under review

Server ID	Hardware Info	Photo link
A1	00:30:48:55:65:dc
A2	00:30:48:55:65:d8
B3	FAILED
C1	TODO
D1	00:30:48:87:ec:a8
E1	FAILED
F2	mobo swaped with G3, requires re-run through nbb, works!
F3	FAILED
F4	FAILED
G1	00:e0:81:31:39:b6
G2	00:e0:81:30:e8:e5
G3	mobo swaped with F2, re-run required, works!, JasperWallace wants this one
H1	FAILED
I1	00:e0:81:2b:a5:a0
I2	00:e0:81:2f:14:04
I3	00:e0:81:2f:c1:bd
J1	FAILED
J3	00:e0:81:32:2b:b4
J4	FAILED
J7	00:e0:81:2f:e7:9b
J8	00:e0:81:61:93:e2
K1	TODO
L1	TODO
M1	TODO
M2	TODO
N2	00:e0:81:34:76:3b
N5	TODO
N6	TODO
N7	FAILED: needs i686 Kernel
O1	FAILED
P1	00:30:48:5d:0c:66
P2	00:30:48:5d:0c:b4
P3	Never used, no CPUs
P4	FAILED
P5	00:30:48:5d:0c:12
Q1	00:e0:81:41:15:00
R1	FAILED

Ready to be photographed

Server ID	Hardware Info	Photo link

Processed

Server ID	Hardware Info	Photo link	Status
N8	00:e0:81:34:6b:c9	of
N4	00:30:48:5e:0c:40	seeds	Put aside for Marc (future member) who would like to buy it. Once he's a member let's give it to him for £100 (20% off the eBay price)
B5	00:e0:81:2b:02:c8	an

For sale

Server ID	Hardware Info	Photo link	Auction

Sold

Server ID	Hardware Info	Photo link	Auction	Status
B2	00:e0:81:2e:75:52	was	[1]	Sold to Terry (ye-olde-shoppe) for £38.68. Not paid yet. Arranging pickup atm.
M3	00:e0:81:34:1e:12	from	[2]	Sold to Vashisth (itstuffz) for £62.00. Paid via PayPal. He hasn't yet replied to my message.

Done

Server ID	Hardware Info	Photo link	Auction	Status
E3	00:30:48:56:52:ca	lady	[3]	Sold to AndyE (member), paid & collected.
B4	00:e0:81:2f:64:6c	a	[4]	Paid via PayPal. Sent via courier.
M4	00:e0:81:43:f4:60	Leeds	[5]	Paid via PayPal & collected. Very nice guy, part of CentOS.
F1	00:e0:81:47:b1:50	packet	[6]	Paid via PayPal & collected.
J2	00:e0:81:32:fa:57	swallowed	[7]	Paid in Cash & collected.
B1	00:e0:81:30:e8:42	There	[8]	Paid via PayPal & collected.
E2	00:30:48:56:52:92	young	[9]	Paid via PayPal. Collected.
J5	00:e0:81:33:7f:b6	a	[10]	Paid cash, £77. Collected.
J6	00:e0:81:32:bf:3f	who	[11]	Paid cash, £51. Collected.
N1	00:30:48:5e:0b:50	Within	[12]	Paid cash, £117. Collected.
N3	00:30:48:5e:0c:c6	half	[13]	Paid cash, £126. Collected.

Troubleshooting

Server won't netboot

• Check that the Option ROM's for the onboard nics are enabled, something like BIOS -> advanced options -> PCI & devices config -> and then you can enable the ROMs. (Sometimes you need to configure it for each port individually.)
• If netboot works but NFS mount fails, try a different ethernet port.

Some drives fail/don't get detected on boot

Remove drives until you found the faulty ones, put them in the "dead drives" box.

Some drives fail during dban or other operation

If you can't figure out how to determine the faulty one just put them all in the "dead drives" box, we will do a second pass of those drives later.

Monitors

Sales status at LfmHardwareAuction/Monitors. Test pattern.

Summary:

24 Working
4 Faulty
28 Total

All to be listed, including faulty, stated as.

A flickr set has photos for each make, nine in total.

Note for ebay listing, item 06 is short of a "mickey mouse" power cable, one item 01 is short of a base.

All photo links next to unit count.

01

9 Units ~ 01A, 01B, 01C, 01D, 01E, 01F, 01G, 01H, 01I in good working order. http://www.flickr.com/photos/daniel-sikar/5210488400/in/set-72157625349679459/

1 unit~ 01J missing base, otherwise in good working order. http://www.flickr.com/photos/daniel-sikar/5245454188/in/set-72157625349679459/

Product Type: Hanns.G LCD monitors     
Description: 
Model ID JC198D / HANNS.G JC198D 
LCD display - TFT - 19" 
1280 x 1024 
250 cd/m2 
700:1 
8 ms 
0.294 mm
DVI-D, VGA 
speakers 
silver

Product page: http://www.dooyoo.co.uk/tft-monitor/hanns-g-jc198d/

02

2 Units ~ 02A, 02B in good working order. http://www.flickr.com/photos/daniel-sikar/5210489222/in/set-72157625349679459/

Model: DXBL-19
60/50Hz 1.5A
Manufacturer: AOC

03

6 units available

4 03B, 03D, 03E, 03F in good working order. http://www.flickr.com/photos/daniel-sikar/5210489906/in/set-72157625349679459/

2 03A, 03C faulty. http://www.flickr.com/photos/daniel-sikar/5245454660/in/set-72157625349679459/

Screen size (inches) 19
Panel Type (TN, IPS) TN
Type LCD
Aspect Ratio 4:3
Resolution 1280 X 1024
Brightness (cd/m2) 300
Contrast Ratio 5000:1
Response Time (ms) 2
Viewing Angle (°) 170
Color Depth (Num of Colors) 16.7M
Pixel Pitch (mm) 0.294 x 0.294
Surface Treatment AG(3H) 
D-Sub Yes
DVI-D Yes 

Product page: http://www.lg.com/uk/it-products/monitors/LG-lcd-monitor-L1953HR.jsp

04

2 Units ~ 04A, 04B in good working order. http://www.flickr.com/photos/daniel-sikar/5209892033/in/set-72157625349679459/

Product Description: V7 L19WA - LCD display - TFT - 19"
Device Type: LCD display / TFT active matrix
Colour: Black, silver
Built-in Devices: Stereo speakers
Dimensions (WxDxH): 46.9 cm x 19 cm x 36.9 cm
Weight: 4.5 kg
Diagonal Size: 19" - widescreen
Dot Pitch / Pixel Pitch: 0.285 mm
Max Resolution: 1440 x 900 / 60 Hz
Colour support: Up to 16.2 million colors
Response Time: 8 ms
Image Brightness: 300 cd/m2
Image Contrast Ratio: 500:1
Audio Output: Speaker(s) - stereo - integrated
Signal Input: VGA
Compliant Standards: TCO '03, CE, CSA, UL, TUV GS, ISO 13406-2, VESA DPMS
Power: AC 120/230 V ( 50/60 Hz )
Power Consumption Operational: 43 Watt
Environmental Standards: ENERGY STAR Qualified

Product page (Amazon): http://www.amazon.co.uk/Videoseven-L19WA-Monitor-Widescreen-Speakers/dp/B000E9Q0M4

05

3 units

05A, 05C in good working order, http://www.flickr.com/photos/daniel-sikar/5210491646/in/set-72157625349679459/

05B faulty. http://www.flickr.com/photos/daniel-sikar/5245455216/in/set-72157625349679459/

Brand	Belinea
Dot Pitch	0.294 mm
Model	10 19 02 (Black, Silver) 19" LCD Monitor
Screen Resolution	1280 x 1024 pixels
Screen Size	19 in
Type	Flat Panel LCD TFT (Active Matrix)

06

1 unit

06A in good working order. http://www.flickr.com/photos/daniel-sikar/5210492476/in/set-72157625349679459/

Mickey Mouse power cable not supplied.

Brand: TC0
Model: 900P
Power: AC 100-240V 50-60Hz 1.0A

07

3 units

• 07C sold to Barry for £27.06, picked up already

07A, 07B, 07C in good working order. http://www.flickr.com/photos/daniel-sikar/5209894487/in/set-72157625349679459/

Type   48cm / 19" TN colour TFT active matrix SXGA LCD
Contrast Ratio  1000:1 (typ.)
Viewing Angles  170° horizontal, 160° vertical (at 10:1)
170° horizontal, 170° vertical (at 5:1)
Brightness  300cd/m² (typ.)
Display Area  37.6cm horizontal x 30.1cm vertical; 48.3cm diagonal
Optimum Resolution  1280 x 1024@60Hz
Response Time  5ms (off-on-off) (typ.)
Light Source  Long life, 50,000 hrs. (typ)
Panel Surface  Anti-glare (3H)
Pixel Pitch  0.294mm
Colour Support  16.2M colours (6-bit + 2-bit FRC)
Pixel Clock  135MHz

Product page: http://www.viewsoniceurope.com/uk/products/desktop-monitors/lcd/graphic-series/vg930m.htm

08

1 unit 08A in good working order. http://www.flickr.com/photos/daniel-sikar/5210494102/in/set-72157625349679459/

19-inch Chimei A190E3-T0J LCD Monitor
Stylish black design
19-inch TFT Active Matrix LCD display
5:4 aspect ratio
0.294 x 0.294 mm pixel pitch
1280 x 1024 maximum resolution
320 cd/m2 brightness
500:1 contrast ratio
8 ms response time
16.2 million Color display 
160º horizontal viewing angle
130º vertical viewing angle
30 - 82 KHz horizontal scanning frequency
56 - 76 Hz vertical scanning frequency
On Screen Display (OSD) controls
Hard coating, anti-glare treatment
0º - 20º tilt

09

1 unit 09A faulty. http://www.flickr.com/photos/daniel-sikar/5210494718/in/set-72157625349679459/

Description 19" Digimate L-1931 TFT
Brightness  	250cd/m2
Contrast ratio 	700:1
Dimensions 	430mm (W) x 380mm (H) x 170mm (D)
Display colours 	16.7M
Input signal 	DVI-D, VGA (D-sub 15pin)
Internal speakers 	Built-in stereo speakers
Osd language 	English, French, Spanish, German, Italian, Portuguese, Dutch, Simplified / Traditional Chinese
Panel size 	19"TFT(Active Matrix)
Pixel pitch 	0.294 x 0.294mm
Power consumption 	MAX 50W, Standby 3W
Power supply 	AC 100~240V 50/60Hz
Resolution 	1280 x 1024(SXGA)
Response time 	12ms
Safety standards 	FCC, CE, UL
Scan frequency 	H:30-80KHz V:56-75Hz
Viewing angle( h/v) 	170 degree(H) / 170 degree(V)
Weight 	4kg

Product page: http://www.aria.co.uk/Products/Displays/Monitors/TFT+19/19%22+Digimate+L-1931+TFT+?productId=23548

USB Drives

Total 16 NexStar 3 external 3.5" hard drive enclosure, USB 2.0 and eSATA

• 9 of the above boxed, with most accessories including PSU (some boxes tatty) PSU are 110-240V but have integral US 2-pin mains connector
• 1 of the above has no box or accessories
• 1 of the above has no PSU but there is a Lacie PSU with the same fitting, may be compatible.
• 3 drives (found so far) are faulty, either not spinning or overloading the power supply. These were mostly unboxed units.
• Disk capacities not fully checked. All examined so far are 750GB Seagate Barracuda SATA --Artag 21:52, 16 January 2011 (UTC)
  • I'd like one or more of these if they are available to hackspacers --Artag 19:20, 27 November 2010 (UTC)

[766917.452964] scsi 7:0:0:0: Direct-Access     ST375033 0AS                   PQ: 0 ANSI: 2
[766917.453582] sd 7:0:0:0: Attached scsi generic sg3 type 0
[766917.476662] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[766917.488073] sd 7:0:0:0: [sdc] Write Protect is off
[766917.488081] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00
[766917.488085] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[766917.505132] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[766917.505175]  sdc: sdc1
[766917.560394] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[766917.560436] sd 7:0:0:0: [sdc] Attached SCSI disk

Selling

See LfmHardwareAuction/Sales (moved suggestions for ebay auction improvements here as well ~Kevin).

People who want to buy stuff: LfmHardwareAuction/Purchasers