Jouan C3i: Difference between revisions
From London Hackspace Wiki
No edit summary |
m (Tolland moved page Centrifuge 10,000RPM to Jouan C3i: is a stupid name) |
(No difference)
| |
Revision as of 10:45, 7 May 2014
| Centrifuge 10,000RPM | |
|---|---|
 | |
| Model | Jouan C3i |
| Sub-category | Biohacking |
| Status | Good working order |
| Training requirement | yes |
| ACnode | no |
| Origin | Imperial College |
| Location | Basement, Biohacking lab |
| Maintainers | Biohackers |
Currently working.
The tachometer works (at low speed), the microswitches on the lid interlock switch on and off and the control electronics and front panel seem to work.
There is a connection diagram for the main board on page 2-11 (page 20 in the pdf linked above). The motor drive is powered directly from the mains, separately to the rest of the main board.
Connector J12 (supplying mains power to the motor drive) is badly damaged and I have removed it. This is a three way Panduit brand IDT connector. I think it is an ITW Pancon brand MAS-CON 3.96mm connector (eg. http://uk.farnell.com/itw-pancon/ce156f22-3-d/wire-board-conn-female-3pos-3-96mm/dp/1418234).
