Project:Tool Access Control/Deployment: Difference between revisions
From London Hackspace Wiki
(Added shapeoko) |
(Lasercutter online) |
||
| Line 44: | Line 44: | ||
| Very little, uses ATX PSU for 12V power | | Very little, uses ATX PSU for 12V power | ||
| Inside the base | | Inside the base | ||
| | | Fitted | ||
|} | |} | ||
Revision as of 22:42, 17 January 2015
This page is for keeping track of what we need to achieve, and how far along we are to achieving it.
Tools
| Name | Location | Maintainers (name +hackspace ID) | Number of Phases | Maximum current draw | ACNode fitting Location | Status |
|---|---|---|---|---|---|---|
| Lulzbot | 3D Printer Corner | Thomas Greer (1424) | 1 | 5A | Inside the base | Fitted, in testing |
| Metal shop tools (6) | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | Proposed. |
| Lasercutter | By the Window | Sol, Henry | 1 | Very little (interlock) | On the side | Proposed |
| Shapeoko | Robotics/CNC area | mentar, tamlyn | 1 | Very little, uses ATX PSU for 12V power | Inside the base | Fitted |
Items in stock
We have some acnode bits scattered around here's a list of who has what where:
- Jasper: 1 x connected launchpad + 1 x pn532 "cooqrobot" card reader + some cards for testing, and 3 (?) spare connected launchpads that can be bought at cose
- Mentar: 1 x connected launchpad + 1 launchpad + 2 x pn532 compact readers
- ?
