Lulzbot Mini: Difference between revisions
From London Hackspace Wiki
(Created equipment page.) |
Chomiliert (talk | contribs) mNo edit summary |
||
| Line 18: | Line 18: | ||
=== Hull === | === Hull === | ||
[[Hull]] is a Lulzbot Mini Standard. <br /> | [[Hull]] is a Lulzbot Mini Standard. <br /> | ||
Accessible via http://hull from inside the hackspace network | Accessible via http://hull from inside the hackspace network. | ||
==== Filament ==== | ==== Filament ==== | ||
Only use the provided XT filament. | Only use the provided XT filament. | ||
| Line 28: | Line 28: | ||
* -Nylon- | * -Nylon- | ||
please | please contact the maintainers if you wish to use a filament that is not available, | ||
| Line 35: | Line 35: | ||
= Training = | = Training = | ||
Training is required. There is a cost of £5 to be trained, payable to the trainer. | Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer. | ||
= Logging = | = Logging = | ||
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1 | All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1 | ||
Revision as of 14:05, 18 January 2017
| Lulzbot 1 (Hull) | |
|---|---|
 | |
| Model | Lulzbot Mini Standard Extruder |
| Sub-category | CNC |
| Status | Good working order |
| Last updated | 13 August 2024 12:54:20 |
| Consumables | XT filament |
| Accessories | Print removal knife |
| Training requirement | yes |
| Training link | https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training |
| ACnode | yes |
| Owner | Hackspace |
| Origin | Donation from Lulzbot |
| Location | 3D printer area, Ground floor |
| Maintainers | cptPrime (Timour), tgreer (Thomas), James N |
Hull
Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.
Filament
Only use the provided XT filament.
Hull will theoretically print the follow filaments:
- -PLA-
- -ABS-
- XT
- -Nylon-
please contact the maintainers if you wish to use a filament that is not available,
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1
