Project:Aerostruder: Difference between revisions
From London Hackspace Wiki
(start documenting project) |
(include picture) |
||
| Line 7: | Line 7: | ||
|created=21/07/2020 | |created=21/07/2020 | ||
}} | }} | ||
[[File:Aerostruder_build.JPG]] | |||
To build and fit an E3D aerostruder hotend to one, or both of the Lulzbot Minis. The Aerostruder setup will allow printing with flexible filaments as well as rigid. | To build and fit an E3D aerostruder hotend to one, or both of the Lulzbot Minis. The Aerostruder setup will allow printing with flexible filaments as well as rigid. | ||
Revision as of 11:39, 22 January 2020
| Aerostruder | |
|---|---|
| Created | 21/07/2020 |
| Members | Welshie,
Thomas Greer, Michael Cullen, Mike Chislett, |
| QR code | |
To build and fit an E3D aerostruder hotend to one, or both of the Lulzbot Minis. The Aerostruder setup will allow printing with flexible filaments as well as rigid.
Progress
- 3D printed parts created
- Brass inserts applied
- Extruder motor mounted
- Extruder assembly mounted
- Limit switch mounted
To Do
- Finish wiring harness
- Electrical testing
- Fitting and alignments, change slicing profiles or E-Steps setting in Marlin firmware if necessary
Additional parts required
Du Pont crimp pins for wiring harness (Ordered Simon Hewison (talk) 10:22, 22 January 2020 (UTC) )
