Difference between revisions of "Router Table"
Jump to navigation
Jump to search
Deanforbes (talk | contribs) (could not find in search the article "Milton discussed this on the list") |
(Page Creation) |
||
Line 3: | Line 3: | ||
|image=Hackspace_Unknown.png | |image=Hackspace_Unknown.png | ||
|category=Equipment | |category=Equipment | ||
+ | |subcat=Woodworking | ||
|status=Good working order | |status=Good working order | ||
|reqtraining=no | |reqtraining=no | ||
|acnode=no | |acnode=no | ||
− | + | |origin=Built in Space | |
− | |origin= | ||
|location=Woodshop | |location=Woodshop | ||
− | |maintainers= | + | |maintainers=Aidas Baltusis, Jonathan Hodgson |
}} | }} | ||
− | a | + | A router table useful for a variety of shaping and profiling tasks in wood. |
+ | |||
+ | The table was constructed by Hackspace members using several commercially available key components, including | ||
+ | * Router: Triton, part no unknown | ||
+ | * Insert plate: Rockler, part no unknown | ||
+ | * Fence Rockler, part no unknown | ||
+ | * Mitre guide, part no unknown | ||
+ | |||
+ | The router has a 1/2" collet and should ideally be used with 1/2" cutters. A reducing bush (soon to be replaced by dedicated 1/4" collet) are available which can be used to hold 1/4" cutters, although lighter cuts must be taken | ||
+ | |||
+ | A range of additional jigs e.g. a box joint jig are available |
Revision as of 10:06, 6 May 2022
A router table useful for a variety of shaping and profiling tasks in wood.
The table was constructed by Hackspace members using several commercially available key components, including
- Router: Triton, part no unknown
- Insert plate: Rockler, part no unknown
- Fence Rockler, part no unknown
- Mitre guide, part no unknown
The router has a 1/2" collet and should ideally be used with 1/2" cutters. A reducing bush (soon to be replaced by dedicated 1/4" collet) are available which can be used to hold 1/4" cutters, although lighter cuts must be taken
A range of additional jigs e.g. a box joint jig are available