Equipment/Axminster Belt & Disc Sander: Difference between revisions
From London Hackspace Wiki
m (Name Tweak) |
(Dodgy motor electronics; spin-start workaround.) |
||
| Line 21: | Line 21: | ||
No metal - the bench grinder and linishing belt in the cage can be used for metal | No metal - the bench grinder and linishing belt in the cage can be used for metal | ||
NOTE: The motor struggles to start and may blow the 13A plug fuse—there are spares in the Electronics room. Spin the disc anticlockwise manually to give the motor a running start. | |||
Revision as of 22:32, 1 July 2022
| Belt & Disc Sander (Axminster) | |
|---|---|
 | |
| Model | Unknown |
| Sub-category | Woodworking |
| Status | Good working order |
| Last updated | 15 May 2023 07:34:24 |
| Consumables | Sanding discs, sanding belts |
| Training requirement | no |
| ACnode | no |
| Location | Wood shop |
| Maintainers | Woodshop team |
The woodshop has a large freestanding belt and disc sander. Very useful for all kinds of smoothing and shaping work in wood.
No training requirement, but please seek advice from other woodshop users if you are unfamiliar with its use
A latex belt cleaner should be used periodically to remove clogged sawdust from the abrasives.
If the belts or discs are showing signs of tearing or excessive clogging notify the mailing list and the maintainers will fit new ones.
No metal - the bench grinder and linishing belt in the cage can be used for metal
NOTE: The motor struggles to start and may blow the 13A plug fuse—there are spares in the Electronics room. Spin the disc anticlockwise manually to give the motor a running start.
