Project:Tool Access Control/Deployment
From London Hackspace Wiki
This page is for keeping track of what we need to achieve, and how far along we are to achieving it.
Tools
| Name | Location | Maintainers | Number of Phases | Maximum current draw | ACNode fitting Location | MAC address | Status |
|---|---|---|---|---|---|---|---|
| Lulzbot | 3D Printer Corner | Thomas Greer | 1 | 5A | Inside the base | ? | In Service |
| Myford lathe | General workshop | Liam, AndyT | 1, | 13A max SSR | Toughened acnode | ? | Installed |
| Lasercutter | By the Window | Sol, Henry | 1 | Very little (interlock) | On the side | ? | In Service |
| Shapeoko | Robotics/CNC area | mentar, yopero, chris77uk | 1 | Very little, uses ATX PSU for 12V power | Inside electronics container | ? | Installed |
| Stratasys | 3D printer area | hipster | 1 | 13A max mains relay | Inside top compartment | ? | Installed |
| TIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | In Service |
| MIG welder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Needs wireless solution | ? | Proposed |
| Grinding wheel 1 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Grinding wheel 2 | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Donkey saw | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Grinder | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
| Frontdoorbot | frontdoor | Jasper, Jasiek, etc... | n/a | n/a | buried in doorframe | 00:1A:B6:02:F3:FC | In Service |
| Backdoorbot | backdoor | Jasiek, Jasper etc... | n/a | n/a | box next to door | 00:1A:B6:02:F3:F5 | In Service |
| Back door | backdoor | cepmender, Welshie | box in ground floor CNC room with gel cell battery backup, acnode-shield v1 | In service testing, bugs with acnode vlan? | |||
| Front door, actually for lift lobby to 1st floor | frontdoor | Welshie | box to be installed in 1st floor comms room, gel cell battery backup, acnode-sheild v1 | in construction, requires gel cell for battery backup |
Items in stock
3x Connected Launchpads 3x 40A SSRs 3x RFID Readers 0x RGB LED arcade buttons
