Lulzbot Mini Flexystuder

From London Hackspace Wiki
Revision as of 13:44, 11 August 2019 by Simon Hewison (talk | contribs) (temporarily fitted with standard Lulzbot extruder)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Lulzbot 2 (Crump)
Hackspace Unknown.png
Model Lulzbot Mini Flexystuder
Sub-category CNC
Status Check the Tools Status Page
Consumables Ninjaflex filament
Accessories Print removal knife, Pritt stick
Training requirement yes
Training link https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode yes
Owner Hackspace
Origin Donation from Lulzbot
Location 3D printer area, Ground floor
Maintainers tgreer, Welshie

Crump

Crump is a Lulzbot Mini that is normally fitted with a Flexystuder.

While the flexystruder is having problems and we are preparing a replacement aerostruder, it has been fitted with a standard Lulzbot extruder for rigid filament. Ninjaflex can't be used in it at the moment, though this will change when we have the new Aerostruder installed.

Accessible via http://crump from inside the hackspace network.

Filament

Only use the provided filament. Use the correct slicing profile for the filament in use.

Cost

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1

Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Lulzbot_Mini_Flexystuder&oldid=53214’