SwapShop

If you have anything you no longer want, list it here, either for free, swap or sale. You can also list the things you want.

Aden

Sale or Swap

• DVB-C to firewire thingy
• DVB-S card

Free

• A couple of tivos (claimed by glen)

Jonty

Sale or swap

• 2x PCI DVB-T cards

Free

• A Dyson DC-16 handheld vacuum, with a knackered battery and no charger. Or tools.

Wants

• A crappy electric drill, at least 18V

JamesHarrison

Sale or Swap

• Misc servers, no disks, Celeron/P4-era, dodgy cases, not proper server-grade things
• 48U Dell full-depth rack, casters, a bit scruffy and a bust lock on side panel (no keys for the front panel lock) but otherwise decent condition, collection only

Wants

• Fibre networking gear (FC HBAs, NICs, switches, disk arrays)
• Storage equipment - old NAS boxes, tape drives, etc (nothing under 100Gb unless it's something like a 73GB/10kRPM FC/SCSI disk)
• RC/flight gear (transmitters, receivers, motors, props, ESCs)
• Hot air rework/temperature controlled soldering iron

Artag

Free

• C/Port and C/Dock for Dell C600 etc. laptops
• Digital BC17F-10 cable for RL01/02

Sale or swap

• 3 Motorola XTN446 radios with drop-in chargers. As new.
• Datron 1051 DVM and 1220 scanner (IEEE-488)
• Small environmental chamber (heat, cold, but not humidity) ~50l capacity

Wants

• Broken Eee PC for spares, or just an Eee PC 4G (701) keyboard.
• Electronics testgear, working or not
• Old calculators, especially hewlett packard

Loan

Various stuff that I could bring to the space by arrangement, for temporary use (some of these are heavy and most would require a car trip so not trivial):

• Testgear - signal generators, DVMs, counters, oscilloscopes, logic analysers, spectrum analysers, LCR measurement, PSUs, current probes etc. Ask if you're looking for something.

• Mechanical - sheet folder, toggle press, die filer, linisher, power hacksaw, grinding vice, scrollsaws, MIG welder, PCB tank, forge/brazing hearth, bar cropper.

Joe/ascenseur

Free

• Motic Manual Microscope (mirror light source)
• A CD Drive

Sale or Swap

• Wasp CCD Barcode Scanner (PS/2)

Wants/Would-Likes

• IDE DVD Drive

Jim/srimech

Free

• Lots of pneumatic gear - 3x 50mm bore 300mm stroke 10 bar cylinders, lots of smaller cylinders, solenoid 3-port valves, 2 carbon dioxide fire extinguishers, 10 bar regulator, 11 bar and 68 bar relief valves, 2l 16 bar buffer tank. None certified/tested, used at collector's risk!

Wants

• Revolution counter, the small kind you find in tape recorders.
• Model steam engine, Mamod or similar

alexs (find me on IRC)

Sale or Swap

• Assembled Peggy2 (RGBW LEDs, no ATMEGA328) (If anyone desperately wants this you can probably have it for free.)
• Canon EOS-350D + kit lens + Really crappy Sigma telephoto.
• Various electric drills
• DeWalt chop saw
• Pneumatic nailgun + Compressor + Nails
• GeForce 8800 GTS
• 20" ViewSonic LCD monitor
• A Wii.

Wants

Some sort of OBD-II adapter. Anything fun.

Teabot / Elliot

Free

• Marantz PM44SE stereo amplifier - working but one phono socket requires care.

Sale

• Atacama SE24 speaker stands, sand-filled.
• Mordaunt Short MS10 speakers (pair)