Router Table

From London Hackspace Wiki
Revision as of 10:06, 6 May 2022 by Toby.m (talk | contribs) (Page Creation)
Jump to navigation Jump to search
Router_Table
Hackspace Unknown.png
Sub-category Woodworking
Status Good working order
Last updated 6 September 2024 08:24:04
Training requirement no
ACnode no
Origin Built in Space
Location Woodshop
Maintainers Aidas Baltusis, Jonathan Hodgson

A router table useful for a variety of shaping and profiling tasks in wood.

The table was constructed by Hackspace members using several commercially available key components, including

  • Router: Triton, part no unknown
  • Insert plate: Rockler, part no unknown
  • Fence Rockler, part no unknown
  • Mitre guide, part no unknown

The router has a 1/2" collet and should ideally be used with 1/2" cutters. A reducing bush (soon to be replaced by dedicated 1/4" collet) are available which can be used to hold 1/4" cutters, although lighter cuts must be taken

A range of additional jigs e.g. a box joint jig are available