Equipment/Hitachi VC-6545
From London Hackspace Wiki
Hitachi VC-6545 CRT Storage Oscilloscope
| Hitachi CRT Digital Storage oscilloscope | |
|---|---|
 | |
| Model | VC-6545 |
| Sub-category | Test equipment |
| Status | Good working order |
| Consumables | None |
| Accessories | Probes, probe tips, earth leads, IEC mains lead |
| Training requirement | Requires Electronics Lab Access |
| ACnode | no |
| Owner | Hackspace |
| Origin | Nigle |
| Location | 1st Floor Electronics Lab |
We have two of these.
Archive.org Online Manual (with PDF download) and Full Text Version
Specs:
40MS/s(1CH), 20MS/s(2CH simultaneously), 100MHz Bandwidth, 4kword(1CH), 2kw/CH, Delayed Sweep, Frequency counter.
Features
- Retro-Cool CRT-based Vector Screen showing Basic Real-time & Storage Oscilloscope
- Exclusive one-shot and intermittent phenomena are simple to capture using the digital storage function.
- Using the pre-trigger function, it is possible to observe the rising edge of a waveform which occurs before the trigger occurs.
- Non-repeating events can be observed as clean waveform using the digital storage function.
- Low-speed phenomena can be observed as a trace using the digital storage function (roll mode).
- External plotter functionality enables hardcopies of CRT waveform data.
- Averaging can be used to reduce noise, providing summary signal of interest.
- Captured waveform can be saved to internal memory and recalled for comparison.
- RS-232C serial interface usable to transfer stored waveform data.
- Dual cursors can be enabled to make accurate measurements of voltage, time, and frequency.
- After waveform capture, it can be displayed in expanded form with interpolation (linear or sine).
- Using sweep time auto-ranging, the sweep rate setting automatically optimised in accordance with the input signal frequency.
- Trigger lock hold the sum of the hold-off time and sweep time for stable trigger of complex pulse trains.
- Frequency of the channel selected as the trigger signal is automatically counted.
