DMXLights
| DMX Lights | |
|---|---|
 | |
| Model | ? |
| Sub-category | Audio/Visual |
| Status | Under construction |
| Training requirement | yes |
| ACnode | no |
| Location | Ground floor, around the social area. |
| Maintainers | You, me, everybody. |
We have 2 DMX lights.
History
We've had them for year and years. They used to be run via ?beacons on IRC and flash when people opened the doors. Then the DMX shield we where using went somewhere (back to it's owner?). For ages we had no dmx shield for them. We've now had one for a while, this page is an attempt to document the system and make it work.
Current setup
We have an Arduino Duemilanove with an ATMega 328, and a DMXSimple shield from Electric laboratory on Tindie.
We have a DMX bus terminator plug thing, and at least one 3 pin cable (XLR?).
The RS485 chip may be blown on the shield (?).
Using the DmxSimple library (has to be patched to change wiring.h -> wiring_private.h in DmxSimple.cpp).
I can't get the lights to do anything.
We are also getting 10 x rgb led lamps that were used in OHM2013.