Equipment/Ultimakers
There are 2 ultimakers currently on loan from "robots for good" project. They are available for use by members under the acnode system. Given the high cost and delicate nature of this equipment training is available to members who have already been inducted for the lulzbot, or have demonstrable previous experience with Ultimaker 3d print hardware.
Product links
{{#invoke:Template translation|renderTranslatedTemplate|template=Draft/core|1=}}
Ultimakers 1 & 2 | |
---|---|
![]() | |
Sub-category | CNC |
Status | Good working order |
Consumables | Printer filament |
Training requirement | Yes |
Training link | 3dprinter_training |
ACnode | yes |
Owner | Wevolver |
Origin | Loan |
Location | Robotics Area, basement |
Maintainers | Rich, Tolland, Chris?, Ian? |
Description
ACNode is in operation on the Ultimaker-1, the ultimaker-2 acnode is not yet commissioned. In order for your existing training to be approved on ACNode, you must run through a machine type induction to demonstrate how to use the sdcard with the Ultimaker.
If you have been trained previously and need approved on ACNode, contact the maintainers to be added to the acnode. Ultimaker recommend the use of Cura to slice and manipulate your model for printing.
Specification & documentation
Printing
- Print speed: 30 mm/s - 300 mm/s
- Travel speed: 30 mm/s - 300 mm/s
- Precision: 12.5 / 12.5 / 5 micron
- Nozzle temperature: 180 - 260 °C
- Heated bed temperature: 50 - 100 °C
Consumables
Use of filament will be covered in the training.
Filament options (3.0mm)
- ABS (lego brick plastic - prints at 190-230 DegC, requires heated bed at 100-110 DegC)
- PLA (biodegradable , based on food starch - prints at 185-190 DegC, optional heated bed, not hotter than 60 DegC)