Equipment/Farnell TSV70
From London Hackspace Wiki
| Farnell Power Supply | |
|---|---|
 | |
| Model | TSV70 |
| Sub-category | Test equipment |
| Status | Good working order |
| Last updated | 13 August 2024 01:25:12 |
| Accessories | no (needs leads) |
| Training requirement | no |
| ACnode | no |
| Origin | Artag |
| Location | Electronics area |
| Maintainers | Artag |
Description
A solid linear british-made Farnell power supply for more demanding jobs.
Two ranges - 30V 10A and 70V 5A.
Note that changing the range switch not only doubles / halves the output voltage, it also changes the meter scale. So it's fairly easy to mis-read it as 25V when it's actually putting out 50V etc. Be careful, or you may fry your circuit sooner than you intended.
Status
Working as of 13/08/2024. Both output fuses were blown but have been replaced on 12/08/2024.
Please report any problems to artag ESPECIALLY if you think it broke while you were using it - I'm interested to fix (or at least be aware of) any fragility in it.
ToDo
- Soak test
Documents
Notes
- Side panels were sourced cut-to-size from ebay seller sgs132 for about £13 total. These are stainless, aluminium woud have been a couple of pounds cheaper.
