MightMIG 190
MIG Welding Set (Sealey MightyMIG 190) | |
---|---|
![]() | |
Model | MightMIG 190 |
Sub-category | Metalworking |
Status | Good working order |
Last updated | 13 August 2024 21:16:59 |
Consumables | Gas, wire |
Training requirement | yes |
Training link | Welding Training |
ACnode | no |
Location | Metalworking shop |
Maintainers | Tim, Des, Dean, Liam |
Mig welding set
Requires training - https://wiki.london.hackspace.org.uk/view/Welding_Training
Argon shielding gas is expensive - please contribute to the gas topup fund as you use this machine
Risk Assessment - Welding
This risk assessment is intended to provide guidance on the risk associated with the above equipment and activities in normal use. Please also check general risk assessments for the space as a whole. Any discrepancies, errors or concerns should be raised with the document maintainers or trustees - do not edit this assessment directly. For responsible persons and last update, see 'version log' of the assessment page.
Activity
Welding of metals via any electric process (MIG, TIG or MMA/Stick)
Signage
Understanding Risk Rating
LOW - Ensure current control measures are in place and continue with activity
MED - Control measures may be adequate, co-supervision is recommended
HIGH - Do not undertake activity without further consultation with area specialists
Risk Assessment
Identify Hazards | Who May be Harmed and How | Severity | Control Measures | Likelihood | Risk Rating |
---|---|---|---|---|---|
Radiation from light and heat. | Users | High | Operators are competent in the use of the welding equipment. Full welding masks with a full UV and IR light filter are to be worn during all welding work. Welders flash can cause blindness and affect eyesight. Fire retardant gloves are to be worn. Hot material is to be treated with care and watched until sufficiently cool as not to pose a fire risk. All material must be fully secured in place using appropriate clamps to earth before the weld commences. If the equipment is not in satisfactory working order it should not be used. | Medium | Medium |
Slips Trips and Falls | Users, Bystanders | Medium | Wear shoes or boots with non-slip soles, in particular in wet or snowy weather – make sure excessive wet isn’t tracked into the space. Ensure that good standards of housekeeping are maintained at all times, cables and other equipment will be managed so as not to cause a trip hazard. | Medium | Low |
The light emitted by the weld can be dangerous to others who look directly at the it. | Bystanders | High | Screens must be put in place to protect others in the area. Welding tools will not be left unattended. The area will be made safe at the end of each session. | Medium | Low |
Fire from Hot Work | Users, bystanders, public | High | It should be ensured that there is no combustible material in close proximity to the work. Suitable protection should be provided for any combustible items that cannot be moved and for combustible construction such as wooden worktops. A check should be carried out on all of the surrounding areas to minimise the possibility of ignition by heat transfer. Fire extinguishers are be provided in the space. Hot work’ should be stopped at the specified time before leaving the space. A thorough inspection of the area should be undertaken once the work is complete after completion. Where necessary, a further check should be carried out before leaving the space. Welding rods are to be cooled in a water filled bucket before disposal, or placed in a sand bucket, not discarded. | Medium | Medium |
Use of gas bottles, leaks and high pressure discharge. | Users, bystanders, public | High | Bottles must be secured in the upright position, preferably on a trolley to aid mobility. All gauges, hoses, bagging and torches must be examined before use, any faulty equipment must be repaired or replaced prior to use. | Medium | Low |