3D Printing

From London Hackspace Wiki
Revision as of 14:13, 18 January 2017 by CDave (talk | contribs) (Added link to large volume printer.)
Jump to: navigation, search

We have two 3D printers, with a large volume printer being worked on.

Equipment

Hull

Hull is a Lulzbot Mini Standard.

Crump

Crump is a Lulzbot Mini Flexystuder.

Cost

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

Current trainer/maintainers are: cptPrime (Timour), tgreer (Thomas) James N

Training Wiki page: https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1