Difference between revisions of "Components"

From London Hackspace Wiki
Jump to navigation Jump to search
Line 107: Line 107:
 
* TEXAS INSTRUMENTS - MAX232N - IC, TRANSCEIVER, 5V[http://uk.farnell.com/jsp/search/productdetail.jsp?SKU=1470445 Farnell]
 
* TEXAS INSTRUMENTS - MAX232N - IC, TRANSCEIVER, 5V[http://uk.farnell.com/jsp/search/productdetail.jsp?SKU=1470445 Farnell]
 
* RESISTOR, 2.2K, 0.125W, 1% [http://uk.farnell.com/jsp/search/productdetail.jsp?SKU=9342834 Farnell]
 
* RESISTOR, 2.2K, 0.125W, 1% [http://uk.farnell.com/jsp/search/productdetail.jsp?SKU=9342834 Farnell]
−
 
−
==Personal requests==
 
−
AntLoom
 
−
* [http://uk.farnell.com/fairchild-semiconductor/h11a1-m/optocoupler-transistor-o-p/dp/1021358?whydiditmatch=rel_3&matchedProduct=h11a1m&Ntt=h11a1m OPTOCOUPLER] x 2, 43p
 
−
* [http://uk.farnell.com/fairchild-semiconductor/moc3042-m/optocoupler-z-x-triac-driver/dp/1021368?whydiditmatch=rel_3&matchedProduct=moc3042m&Ntt=moc3042m OPTOCOUPLER, Z-X] x2, 124p
 
−
* [http://uk.farnell.com/nxp/bt136-600/triac-4a-600v-to-220/dp/1081316 NXP - BT136-600 - TRIAC, 4A, 600V, TO-220 ] x2, 65p
 
−
 
−
wyan:
 
−
* [http://uk.farnell.com/amic/a623308a-70sf/ic-sram-cmos-64k-623308-dip28/dp/9117245 SRAM chip] x 2
 
−
 
−
daveb:
 
−
* Raspberry PI - to be available from Farnell... would be great to run hacking courses for these, as they are very affordable, and capable and low power (green)!
 
−
 
−
===Links Needed===
 
−
 
−
Please help by finding an appropriate link for the following.
 
−
* new tips for the general soldering irons! (Not at space so can't check models, if this matters)
 
−
* "brass sponge" for cleaning soldering iron tips.[http://www.rapidonline.com/Tools-Fasteners-Production-Equipment/Soldering-Equipment/Accessories/Tip-cleaner/35323/kw/tip+cleaner][http://www.ebay.co.uk/itm/XYTRONIC-SOLDERING-TIP-CLEANER-REPLACEMENT-459-/350429929783?pt=UK_Home_Garden_PowerTools_SM&hash=item5197406137][http://uk.farnell.com/xytronic/459/replacement-pad-for-460/dp/4683730]
 
−
* A couple of stiff brushes - to make cleanup around MIll and Lathe easier. Perhaps with some chain to tie them to the table.
 
−
* LEDs (varying, some good bright ones) +1 (we have loads of basic red/green/yellow etc ones)
 
−
**you can get LEDs dirt cheap off ebay. i bought 500 blue LEDs for under 7 quid a little while ago. if you want to go with a more reliable brand, [http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=6192852 green LEDs] [http://www.rapidonline.com/sku/Electronic-Components/Optoelectronics/5mm-LEDs/Standard-5mm-LED/61374/55-1790 red LEDs] [http://www.rapidonline.com/sku/Electronic-Components/Optoelectronics/5mm-LEDs/Standard-5mm-LED/61374/55-1754 blue LEDs] [http://www.rapidonline.com/Electronic-Components/Optoelectronics/5mm-LEDs/Bi-colour-5mm-LED/64855 bicolour LEDs] found after a quick price check between rapid and RS. i haven't worked out how to use farnell's website yet so i can't comment on their prices.-alecjw
 
−
* 12V 3A solid-state relay
 
−
* solid-core cable (RGBYKW) and multicore
 
−
**http://www.rapidonline.com/Cables-Connectors/Equipment-Wire/Equipment-Wire/1-0.6mm-Single-core-equipment-wire-on-100m-reels/62317 seems to be the cheapest, having done a quick price check against RS and Farnell. I have 2 reels at home: orange and blue - can bring them in. -alecjw
 
−
 
−
=== Tools and equipment ===
 
−
 
−
See the [[Wishlist]] page.
 
−
 
−
Some tools we could regard as consumables; get cheap ones and replace them frequently. E.g.:
 
−
* screw drivers
 
−
 
−
=== Tool bits and pieces  ===
 
−
 
−
Recently retired/thrown away
 
−
 
−
* spade-drills which had side of the spade drill broken sized 8, 10, 12 and 22 (2011/04)
 
−
* Down to the last hacksaw iron blade (2011/04) - 410 length
 
−
* Down to the last Pendulum Jigsaw saws of the non-T shape saws  (2011/04)
 
−
 
−
=== Consumables ===
 
−
 
−
We're running low on:
 
−
* Logic chips. I think the 74HCT series is a reasonable place to start, but I'm not an expert here.
 
−
* Some banaplugs or already wired up banaplug wires in the usual colours and length. 
 
−
* dark blue multicore wire [[User:Akki14|Akki14]] 06:57, 29 May 2012 (UTC)
 
−
* Heat shrink (bought some its on top of the component wall shelves - need more)
 
−
* Masking tape
 
−
* Header Pins - Order Code: 9729038 [http://uk.farnell.com/fischer-elektronik/sl1-025-36z/header-pin-2-54mm-36way/dp/9729038?Ntt=SL1.025.36Z] x 2
 
−
 
−
 
−
See also: [[Inventory#Stocked components]].
 
−
 
−
=== Fasteners ===
 
−
 
−
The [[Fasteners|drawers of nuts and bolts]] are maintained by [[User:Artag|Artag]]. Please contact if you have requests.
 
−
 
−
 
−
[[Category:Inventories]]
 
−
[[Category:Consumables]]
 

Revision as of 12:56, 13 May 2014

The Hackspace carries a range of electronic (and other) components in stock. As a rule, members can use anything for free, as long as the cost is less than £1. However, if you're using more than £5-£10 worth of components a month, we'd appreciate a donation to cover those costs.

Purchasing

Please include a link to the item, preferably from Farnell, or it won't be ordered.

If you're a member of the space we'll happily order components for you and take advantage of bulk discounts/free shipping. If the component you request is cheap, we may order more than you need and bring it into stock in the space (if that's the case, then it's free as above).


Requests

  • 4051 Analog Multiplex/DeMultiplexer @Farnell x 4
  • Positive photo resist spray @rapid (free del over £35)
  • Stripboard, e.g. [1] unless there are cheaper options. There are: [2]
  • NPN transistors (ONE LEFT), atm we stock BC547BG but these are much cheaper [3].
  • Low Power MosFETs [4]
  • 16MHz crystals (farnell) - cheaper from Rapid
  • Arduinos (we should probably get these from Earthshine, but our budget is a bit tight to stretch to them currently -Russ)
  • Miniature trimming potentiometers
    • 10K
    • 100K
    • I have put a selection of multiturn trimpots in a translucent plastic compartment box, currently on top of the component drawers in the main room - artag.
  • CD4050BE 5v <-> 3v3 level shifter
  • MCP23008 I2C IO expander
  • MAX232 RS232 driver @[5] x 4
  • piezo buzzer
  • DC Jacks ("cigar plugs") for our cigar sockets, can't figure out what type it is...
  • Reed switch
  • Schotty diodes
  • Crocodile Clips
  • Spool of single core wire, current one is getting fairly low
  • Header pins in a variety of formats. 1 x 20, 2 x 10 especially. AFAIK the component trays have no header pins in them right now. Associated sockets would be good too.

Previous orders

DO NOT EDIT THE "PREVIOUS ORDERS" SECTION

This section is to keep track of past orders.

If you want to report stuff that's running low or missing, do so in the Requests section. Making a mess of this page won't help us ordering the right components.

June 2013

  • Hex inverter CD4009UBE @Farnell
  • 3.5mm stereo jack
  • 4093 (four NAND Schmitt Triggers in one chip, useful for e.g. polyphonic square wave oscillators) (now UK stock)
  • 4017B ("decade counter"/10-step counter, useful for sequencers) (now UK stock)
  • 555 and 556 timers. These are generally useful, we should always keep a few in stock.
  • Bits for the Oki PS-900 soldering station. PHT or SFV series should fit, and be hot enough for toxic-flux lead-free solder.
  • chocolate blocks
  • 200 x 2.5mm Cable Ties Delivered
  • NPN transistors. There was a bag marked 2N3904. I think that's a reasonable Farnell part to replace it with.

May 2014

  • Desoldering braid (get 4) Farnell
  • 9v PP3 batteries Farnell
  • Medium (1mm) (get 2) soldering wire Farnell
  • Fine (0.5mm) (get 2) soldering wire Farnell
  • NPN transistors 2N3904.
  • Chocolate blocks Farnell
  • SRAM CMOS 64K, 623308, DIP28 Farnell
  • TEXAS INSTRUMENTS - MAX232N - IC, TRANSCEIVER, 5VFarnell
  • RESISTOR, 2.2K, 0.125W, 1% Farnell
Retrieved from ‘https://wiki.london.hackspace.org.uk/w/index.php?title=Components&oldid=41399’