Equipment/Axminster Belt & Disc Sander
< Equipment
Jump to navigation
Jump to search
Revision as of 18:46, 26 July 2022 by Liyang (talk | contribs) (→Maintenance: Upload manual; Padski fixed the centrifugal switch.)
| Belt & Disc Sander (Axminster) | |
|---|---|
 | |
| Model | Unknown |
| Sub-category | Woodworking |
| Status | Good working order |
| Last updated | 15 May 2023 07:34:24 |
| Consumables | Sanding discs, sanding belts |
| Training requirement | no |
| ACnode | no |
| Location | Wood shop |
| Maintainers | Woodshop team |
The wood shop has a large freestanding belt and disc sander. Very useful for all kinds of smoothing and shaping work in wood.
No training requirement, but please seek advice from other wood shop users if you are unfamiliar with its use
A latex belt cleaner should be used periodically to remove clogged sawdust from the abrasives.
If the belts or discs are showing signs of tearing or excessive clogging notify the mailing list and the maintainers will fit new ones.
No metal - the bench grinder and linishing belt in the cage can be used for metal
Maintenance
Manual for the JET JSC-6DC with parts diagram—identical to our Axminster apart from branding.
- 2022-06-21 Padski got the motor end-cap off with repeated & firm strikes of the sanding disc end of the rotor shaft head-on with a wooden mallet. (Remove the belt, but no need to loosen the belt end-cap: consider the inertia of the end-cap.) Cleaned the centrifugal switch contacts, although the plastic triangular wedge was also incorrectly seated. See also: Discord logs from a failed attempt to open it by Liyang on 2022-06-19.