Difference between revisions of "Equipment/DrillPress"
Jump to navigation
Jump to search
(→Status) |
|||
| Line 2: | Line 2: | ||
==Status== | ==Status== | ||
| − | We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". | + | We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "[http://uk.farnell.com/multicomp/143-0127/pin-chuck-auto-3-jaw/dp/1518437 pin chuck]". |
| + | |||
| + | Or use the Dremel and mini-mill for high speed / light duty / precision stuff, this one for everything else. | ||
| + | |||
| + | Ideal jobs : | ||
| + | |||
| + | Dremel | ||
| + | *High speed, tiny bits e.g. PCB drilling | ||
| + | |||
| + | Mini-Mill | ||
| + | * Milling plastic, small aluminium etc. | ||
| + | * Drilling jobs requiring accurate positioning - use the table positioning | ||
==Model== | ==Model== | ||
Revision as of 11:58, 13 May 2011
Status
We now have a drill press. The keyless chuck only goes down to 2.7 mm, so we need to get a "pin chuck".
Or use the Dremel and mini-mill for high speed / light duty / precision stuff, this one for everything else.
Ideal jobs :
Dremel
- High speed, tiny bits e.g. PCB drilling
Mini-Mill
- Milling plastic, small aluminium etc.
- Drilling jobs requiring accurate positioning - use the table positioning
Model
- Make: Axminster
- Model: ED16SB
- Manual: on the Axminster website