Difference between revisions of "Equipment/Farnell TSV70"
Jump to navigation
Jump to search
(→Status) |
(→ToDo) |
||
Line 31: | Line 31: | ||
== ToDo == | == ToDo == | ||
− | * | + | *Test (loaded at 30V 10A, 70V 5A, soak test) |
*Replace output terminals (ideally with better ones) | *Replace output terminals (ideally with better ones) | ||
*Make side panels (Laser cut acrylic would do nicely) | *Make side panels (Laser cut acrylic would do nicely) | ||
− | |||
− | |||
*Place in usable location (maybe under the solder oven, on a stand, with nice long thick DC leads added). | *Place in usable location (maybe under the solder oven, on a stand, with nice long thick DC leads added). | ||
Revision as of 11:07, 3 October 2014
Farnell Power Supply | |
---|---|
Model | TSV70 |
Sub-category | Test equipment |
Status | Faulty |
Accessories | no (needs leads) |
Training requirement | no |
ACnode | no |
Origin | Artag |
Location | Ground Floor, Electronics area |
Description
A solid linear british-made Farnell power supply for more demanding jobs. 30V 10A / 70V 5A
Status
Working. probably.
- Replaced shorted output transistor and about 6 others
- Roughly working. Output controllable. Not thoroughly tested.
- I broke an output terminal
ToDo
- Test (loaded at 30V 10A, 70V 5A, soak test)
- Replace output terminals (ideally with better ones)
- Make side panels (Laser cut acrylic would do nicely)
- Place in usable location (maybe under the solder oven, on a stand, with nice long thick DC leads added).