Difference between revisions of "Equipment/Kiln-2"
Jump to navigation
Jump to search
Deanforbes (talk | contribs) |
Deanforbes (talk | contribs) |
||
| Line 10: | Line 10: | ||
|location=Cage | |location=Cage | ||
}} | }} | ||
| − | + | ||
| + | |||
| + | This Kiln is to be used for clean work only, it has a small void | ||
| + | |||
| + | Goes up to 1600°C at least in theory. and is located in the cage | ||
| + | |||
| + | using the controls are non trivial (a dummies guide would be useful) the manual for the controller is here https://wiki.london.hackspace.org.uk/view/File:Kiln812.pdf | ||
| + | |||
| + | you need a 16amp extension lead to run this | ||
| + | |||
| + | |||
https://wiki.london.hackspace.org.uk/view/File:Kiln812.pdf | https://wiki.london.hackspace.org.uk/view/File:Kiln812.pdf | ||
Revision as of 16:01, 14 November 2021
| QMUL Kiln | |
|---|---|
 | |
| Sub-category | Metalworking |
| Status | Good working order |
| Last updated | 23 June 2022 07:46:38 |
| Training requirement | no |
| ACnode | no |
| Origin | Donation from Queen Mary, University of London |
| Location | Cage |
This Kiln is to be used for clean work only, it has a small void
Goes up to 1600°C at least in theory. and is located in the cage
using the controls are non trivial (a dummies guide would be useful) the manual for the controller is here https://wiki.london.hackspace.org.uk/view/File:Kiln812.pdf
you need a 16amp extension lead to run this