Revision as of 14:19, 18 January 2017

Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.

Only use the provided XT filament.

Hull will theoretically print the follow filaments:

please contact the maintainers if you wish to use a filament that is not available.

Cost

Lulzbot 1 (Hull)
Model	Lulzbot Mini Standard Extruder
Sub-category	CNC
Status	Good working order
Last updated	21 February 2022 13:37:43
Consumables	XT filament
Accessories	Print removal knife
Training requirement	yes
Training link	https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode	yes
Owner	Hackspace
Origin	Donation from Lulzbot
Location	3D printer area, Ground floor
Maintainers	cptPrime (Timour), tgreer (Thomas), James N

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

@@ Line 23: / Line 23: @@
 Hull will theoretically print the follow filaments:
-* -PLA-
+* PLA
-* -ABS-
+* ABS
-* XT
+* ''XT''
-* -Nylon-
+* Nylon
-please contact the maintainers if you wish to use a filament that is not available,
+please contact the maintainers if you wish to use a filament that is not available.
 = Cost =
-Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
+Using the printers costs £1.50/hour of printing + 50p/meter of filament. [[3D_Printing/Print_via_Octoprint|Octoprint]] gives you both of these.
 = Training =