Revision as of 14:05, 18 January 2017

Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.

Only use the provided XT filament.

Hull will theoretically print the follow filaments:

please contact the maintainers if you wish to use a filament that is not available,

Cost

Lulzbot 1 (Hull)
Model	Lulzbot Mini Standard Extruder
Sub-category	CNC
Status	Good working order
Last updated	21 February 2022 13:37:43
Consumables	XT filament
Accessories	Print removal knife
Training requirement	yes
Training link	https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode	yes
Owner	Hackspace
Origin	Donation from Lulzbot
Location	3D printer area, Ground floor
Maintainers	cptPrime (Timour), tgreer (Thomas), James N

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

@@ Line 18: / Line 18: @@
 === Hull ===
 [[Hull]] is a Lulzbot Mini Standard. <br />
-Accessible via http://hull from inside the hackspace network. Login with user: hull and password: hull.
+Accessible via http://hull from inside the hackspace network.
 ==== Filament ====
 Only use the provided XT filament.
@@ Line 28: / Line 28: @@
 * -Nylon-
-please consult the maintainers if you with to use your own filaments.
+please contact the maintainers if you wish to use a filament that is not available,
@@ Line 35: / Line 35: @@
 = Training =
-Training is required. There is a cost of £5 to be trained, payable to the trainer.
+Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
 = Logging =
 All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1