Lulzbot Mini
Jump to navigation
Jump to search
| Lulzbot 1 (Hull) | |
|---|---|
 | |
| Model | Lulzbot Mini Standard Extruder |
| Sub-category | CNC |
| Status | Good working order |
| Last updated | 21 February 2022 13:37:43 |
| Consumables | XT filament |
| Accessories | Print removal knife |
| Training requirement | yes |
| Training link | https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training |
| ACnode | yes |
| Owner | Hackspace |
| Origin | Donation from Lulzbot |
| Location | 3D printer area, Ground floor |
| Maintainers | cptPrime (Timour), tgreer (Thomas), James N |
Hull
Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.
Filament
Only use the provided XT filament.
Hull will theoretically print the follow filaments:
- PLA
- ABS
- XT
- Nylon
please contact the maintainers if you wish to use a filament that is not available.
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1