Lulzbot Mini
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Lulzbot 1 (Hull) | |
---|---|
Model | Lulzbot Mini Standard Extruder |
Sub-category | CNC |
Status | Good working order |
Last updated | 21 February 2022 13:37:43 |
Consumables | XT filament |
Accessories | Print removal knife |
Training requirement | yes |
Training link | https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training |
ACnode | yes |
Owner | Hackspace |
Origin | Donation from Lulzbot |
Location | 3D printer area, Ground floor |
Maintainers | cptPrime (Timour), tgreer (Thomas), James N |
Hull
Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.
Filament
Only use the provided XT filament.
Hull will theoretically print the follow filaments:
- PLA
- ABS
- XT
- Nylon
please contact the maintainers if you wish to use a filament that is not available.
Cost
Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.
Training
Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.
Logging
All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1