Router Table
Jump to navigation
Jump to search
| Router_Table | |
|---|---|
 | |
| Sub-category | Woodworking |
| Status | Good working order |
| Last updated | 6 May 2022 11:04:42 |
| Training requirement | no |
| ACnode | no |
| Origin | Built in Space |
| Location | Woodshop |
| Maintainers | Aidas Baltusis, Jonathan Hodgson |
A router table useful for a variety of shaping and profiling tasks in wood.
The table was constructed by Hackspace members using several commercially available key components, including
- Router: Triton, part no unknown
- Insert plate: Rockler, part no unknown
- Fence Rockler, part no unknown
- Mitre guide, part no unknown
The router has a 1/2" collet and should ideally be used with 1/2" cutters. A reducing bush (soon to be replaced by dedicated 1/4" collet) are available which can be used to hold 1/4" cutters, although lighter cuts must be taken
A range of additional jigs e.g. a box joint jig are available