1,034
edits
Equipment/Hitachi VC-6545: Difference between revisions
From London Hackspace Wiki
m
→Hitachi VC-6545 CRT Storage Oscilloscope: Specs and manual and notes.
m (image) |
m (→Hitachi VC-6545 CRT Storage Oscilloscope: Specs and manual and notes.) |
||
| Line 20: | Line 20: | ||
We have two of these. | We have two of these. | ||
Manual is [http://eww.ko4bb.com/getsimple/index.php?id=download&file=06_Misc_Test_Equipment/Hitachi/Hitachi_VC6025_6045_6525_6545_Oscilloscope_Service_Manual.pdf accessible for download here courtesy of amateur radio enthusiast KO4BB.] | |||
Specs: | |||
40MS/s(1CH), | |||
20MS/s(2CH simultaneously), | |||
100MHz Bandwidth, 4kword(1CH), 2kw/CH, | |||
Delayed Sweep, Frequency counter. | |||
'''Features''' | |||
* Modern CRT-based Basic Real-time & Storage Oscilloscope | |||
* Exclusive one-shot and intermittent phenomena are simple to capture using the digital storage function. | |||
* Using the pre-trigger function, it is possible to observe the rising edge of a waveform which occurs before the trigger occurs. | |||
* Non-repeating events can be observed as clean waveform using the digital storage function. | |||
* Low-speed phenomena can be observed as a trace using the digital storage function (roll mode). | |||
* External plotter functionality enables hardcopies of CRT waveform data. | |||
* Averaging can be used to reduce noise, providing summary signal of interest. | |||
* Captured waveform can be saved to internal memory and recalled for comparison. | |||
* RS-232C serial interface usable to transfer stored waveform data. | |||
* Dual cursors can be enabled to make accurate measurements of voltage, time, and frequency. | |||
* After waveform capture, it can be displayed in expanded form with interpolation (linear or sine). | |||
* Using sweep time auto-ranging, the sweep rate setting automatically optimised in accordance with the input signal frequency. | |||
* Trigger lock hold the sum of the hold-off time and sweep time for stable trigger of complex pulse trains. | |||
* Frequency of the channel selected as the trigger signal is automatically counted. | |||
