538
edits
Lulzbot Mini: Difference between revisions
From London Hackspace Wiki
more tips
No edit summary |
(more tips) |
||
| Line 20: | Line 20: | ||
Accessible via http://hull from inside the hackspace network. | Accessible via http://hull from inside the hackspace network. | ||
==== Filament ==== | ==== Filament ==== | ||
Only use the provided | Only use the provided filament. | ||
Hull will theoretically print the follow filaments: | Hull will theoretically print the follow filaments: | ||
| Line 27: | Line 27: | ||
* ''XT'' | * ''XT'' | ||
* Nylon | * Nylon | ||
Always use the correct slicing profile for the filament material you are using. Different filaments have different melting and burning points, so getting the wrong material type can end up with a scorched mess, or a failure to extrude with a strained extruder motor. Beware that ABS is alphabetically first on the drop-down but less likely to be used. | |||
please contact the maintainers if you wish to use a filament that is not available. | please contact the maintainers if you wish to use a filament that is not available. | ||
