Difference between revisions of "Project:USB Disco Dance Floor"

From London Hackspace Wiki
Jump to navigation Jump to search
(Initial project description)
 
(No difference)

Latest revision as of 07:27, 4 April 2011

USB Disco Dance Floor
Created 2011-03-31
Members DMI
QR code


Introduction

The aim of this project is to create a USB-controlled, Arudino-powered 70's-style disco dance floor, inspired by a similar project by a student at MIT. It will act as a modular, low-resolution RGB display. Each pixel will be 6-8" per side, and it will come in 4x4-pixel modules that can be connected together.

The board, firmware, and software will (of course) be open-sourced.

Terminology

Each pixel will be referred to as a cell, and each self-contained block of 4x4 pixels will be referred to as a module.

Versions

  • Version 1 of the project is currently at the prototype stage (as of 2011-04-04). More information can be found on its page.
  • Version 2 of the project is a planned future enhancement, to include UV as well as RGB in the display, and the ability to sense pressure on the surface.