Brewing

London Hackspace had an active homebrewing subgroup at the old Hackney rd location. We still have a shared full-mash gas-fired brewing setup which is capable of a brew length of about 80 litres, as well as a CO2 keg dispense system. Anyone can participate, even if you've had no experience before, there's always cleaning to be done. :)

Since our brewing equipment is gas-fired and the space isn't well suited to the steam produced, we brew outside on the loading dock. This is more pleasant in the summer than in the winter.

Brewing as a "project" was driven by Det, helped by Ross, overseen by Russ with equipment borrowed from B3cft.

Get in touch

A public Google sub-group exists for planning brewdays, discussing recipes and the like. Other topics that affect the Space as a whole should be done on the main mailing list.

IRC: #london-hack-space-brewing on Freenode

Equipment

B3cft has kindly loaned the space his setup The kit is to be considered Hackspace infrastructure and is not to be hacked, but can be used with respect. As always, please clean up after yourselves, and return the equipment to where you found it. (Mention the permanent location of the kit here)

Full list of brewing equipment at the Hackspace:

Item	Quantity	Owner	Notes
100L Kettle	1x	Hackspace pledged	incl. hop filter & ball valve
Gas burner	1x	B3cft
High pressure gas regulator	1x	B3cft	Replaced the perished hose, but could do with a longer one.
13kg Propane tank	2x	B3cft & Hackspace (hired)
80L Stainless mash tun	1x	B3cft
Converted keg kettle	1x	B3cft
29L Brupak Electric Boiler	1x	Det	Good for HLT. Element needs regular cleaning to prevent gunking up the thermostat
60L fermenting vessels	3x	Hackspace
25L fermenting vessels	4x	Det & Ross	All complete with bungs & airlocks
19L Cornies	8x	B3cft	Some require servicing. (perished o-rings, dodgy quick release valves, etc.)
Cornie taps & connectors	3x pairs (?)	B3cft	Gas & Liquid pair (Gray = gas, Black = liquid)
Copper immersion chiller	1x	B3cft
Hose and fittings	25m	Hackspace	(Bathroom tap adapter and hose connector)
Refractometer	1x	B3cft
Brew belt	1x	Ross
Thermometer & Hydrometer	1x	Ross
brewbot	1x	Det	2x temp probes & thermowells for the FVs
Silicon hoses & Quick Connects		Hackspace pledged

Brewing equipment available but not at the Hackspace:

Item	Qty if >1	Owner	Notes
Mash tun (25L)	2	Ross & Det

Beers

• Current beers
• Recipes
• Potential beer names

Consumables

See this sub-page for a current stock list.

Gas bottle refills can be obtained from: http://www.londongases.co.uk/lgcalor.php They'll deliver and take away the empty for £32.50.

We currently have 2x 13kg propane tanks, both with standard 27mm screw-in regulator. Please make sure there is always one full. If one runs out and you start the new one, send an email to the LHS Brewing group to let us know, and perhaps start a pledge for a refill.

Gas status:

• 13kg - Full
• 13kg - 4.5kg (35%) remaining

The tare (empty) weight of a 13kg propane cylinder is 11kg.

Water

Water analysis by Murphy's Homebrew from a sample taken on 22/03/2014, and from the Thames Water Quality Report 2012:

pH	CaCO3	Calcium(Ca)	Magnesium(Mg)	Sulphate(SO4)	Nitrate(NO3)	Sodium(Na)	Chloride(Cl)	Fluoride(F)
7.14	211mg/l	89mg/l	5mg/l	48.27mg/l	25.2mg/l	39.9mg/l	43.5mg/l	0.18mg/l

Liquor Treatment Calculator

Projects

In Progress

Project	Description	Owner	Status
Realtime Beer Stats	Build a Kegbot system	Det	The Kegbot board has arrived, need to wire up our existing flowmeters.

Up For Grabs

Project	Description	Owner	Status
Sparge Arm	Build a better fly sparge arm. Doesn't have to be a rotating one	Up for grabs	Worth doing? We do already have a little fly sparge arm that can be hacked.
Spent Grain	Find something to do with the spent grain	Up for grabs
Chiller	Build a cooling chamber or something	Up for grabs	http://forum.brewpi.com/discussion/116/diy-fermentation-chamber-from-used-fridge

Completed

Project	Description	Owner	Status
BrewPi	Temperature controller/grapher/etc.	Det	brewbot complete. Still yet to hook up the solid state relays to anything.
Hose Tap	Install an outdoor hose tap. eg. http://www.youtube.com/watch?v=2XxJJKof2OQ & http://goo.gl/co3tWc	Up for grabs	Done, thanks Paddy & tgreer

Dead

Project	Description	Owner	Status
Realtime Beer Stats	Hack the Wii Balance Board to weigh the cornies in the kegerator	Det	One of the 4 sensors is a bit derpy, meaning depending on where the keg is placed on the platform, a different reading is produced. Haven't thought of a work around as yet.

Pledges

From time to time we need to buy new things, be it consumables like propane, or new kit like a new boil kettle.

Current Pledges

• Hosing and pump
• Lasercutter attachment to etch pint glassses

Completed Pledges

• 2nd (full) propane tank
• 100L Stainless pot

Logo

Some suggested logos for the group