Equipment/Kiln-2: Difference between revisions
(Static changed to faulty) |
mNo edit summary |
||
| Line 14: | Line 14: | ||
}} | }} | ||
As of 2022-02-23 has 2 failed elements. Discussions ongoing as to how to fix/ replace it, until then this equipment cannot be used | |||
A metalworking kiln with various applications in heat-treating, light forging or casting of metals | A metalworking kiln with various applications in heat-treating, light forging or casting of metals | ||
Revision as of 14:05, 23 February 2022
| Kiln (QMUL) | |
|---|---|
 | |
| Sub-category | Metalworking |
| Status | Faulty |
| Last updated | 23 June 2022 07:46:38 |
| Training requirement | no |
| ACnode | no |
| Owner | LHS |
| Origin | Donation from Queen Mary, University of London |
| Location | Cage |
| Maintainers | Machine Shop Team |
As of 2022-02-23 has 2 failed elements. Discussions ongoing as to how to fix/ replace it, until then this equipment cannot be used
A metalworking kiln with various applications in heat-treating, light forging or casting of metals
No training requirement, but please seek advice from other metalshop users if you are unfamiliar with its use
This has the highest maximum temperature of hackspace's two kilns (1600°C theoretical maximum - successfully used up to 1250°C for brass casting), but has a relatively small internal cavity. Larger pieces can be heated in the Carbolite Kiln.
Not suitable for ceramics. this kiln is to be used for clean work only, it has a small void
Using the controls are non trivial (a dummies guide would be useful) the manual for the controller is here https://wiki.london.hackspace.org.uk/view/File:Kiln812.pdf
you need a 16amp extension lead to run this
