Equipment/Prologix GPIB-USB controller: Difference between revisions
From London Hackspace Wiki
m (Sci moved page GPIB to Equipment/Prologix GPIB-USB controller: Namespace cleanup.) |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{EquipmentInfobox | |||
| name = Prologix GPIB-USB controller <!-- Name of the item. --> | |||
| image = Hackspace_Unknown.png <!-- Image of the item. Leave with placeholder image if none exists. --> | |||
| model = Unknown <!-- Model --> | |||
| category = Equipment <!-- Main category. Please leave alone to keep item in this category --> | |||
| subcat = Test equipment<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one --> | |||
| status = <!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown --> | |||
| consumables = Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. --> | |||
| accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. --> | |||
| reqtraining = <!-- Is training required to use this equipment? Yes or no. --> | |||
| trainlink = Unknown <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. --> | |||
| acnode = <!-- Is the equipment ACnode locked? --> | |||
| owner = Unknown <!-- Provide a link to owners members page if other than LHS --> | |||
| origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki --> | |||
| location = <!-- Floor, room/zone and location within that area --> | |||
| maintainers = <!-- NO LINKS PLEASE; it currently breaks the template. If someone is nominated as managing the upkeep of this item, please list them here. --> | |||
| template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates --> | |||
}} | |||
There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture. | There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture. | ||
| Line 19: | Line 38: | ||
This device is *not* to hack - just to aid your hacking :) | This device is *not* to hack - just to aid your hacking :) | ||
== current devices | == current devices == | ||
* ADDR 6 -- Programmable Power supply/cycler | * ADDR 6 -- Programmable Power supply/cycler | ||
| Line 25: | Line 44: | ||
* ADDR 9 -- HP3488A Electronic Switch Unit | * ADDR 9 -- HP3488A Electronic Switch Unit | ||
* ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter | * ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter | ||
Latest revision as of 18:29, 29 May 2013
| Prologix GPIB-USB controller | |
|---|---|
 | |
| Model | Unknown |
| Sub-category | Test equipment |
| Consumables | Unknown |
| Accessories | Unknown |
| Training link | Unknown |
| Owner | Unknown |
| Origin | Unknown |
There is a Prologic GPIB to Ethernet adaptor available in the electronics area. It connects a couple of meters to ethernet - and lets one do some automation on capture.
- MAC Address: 00:21:69:01:05:57 a
- Usually on IP Address 172.31.24.126
- [Documentation]
- Responds to 3040 discovery and telnet to port 1234
Typical use session:
- telnet 172.31.24.126 1234
- ++addr 10
- *IDN?
- HP127812
- MEASURE:VOLT:DC
- 12.3912
I.e. telnet to the box, talk to GPIB address 10 - ask it to identify itself - and then proceed to measure the voltage (this will by default assume autoranging and adjust the settings as needed).
This device is *not* to hack - just to aid your hacking :)
current devices
* ADDR 6 -- Programmable Power supply/cycler * ADDR 7 -- HP8112 Signal generator * ADDR 9 -- HP3488A Electronic Switch Unit * ADDR 10 -- SOLARTRON SCHLUMBERGER 7150N Multimeter
