Project:Tool Access Control/Deployment: Difference between revisions
From London Hackspace Wiki
(update a bit closer to reality) |
|||
Line 159: | Line 159: | ||
== Items in stock == | == Items in stock == | ||
* | * 0x Connected Launchpads | ||
* 3x 40A SSRs | * 3x 40A SSRs | ||
* 3x RFID Readers | * 3x RFID Readers | ||
* 0x RGB LED arcade buttons | * 0x RGB LED arcade buttons |
Revision as of 13:44, 24 August 2020
This page is for keeping track of what we need to achieve, and how far along we are to achieving it.
Tools
Name | NodeID | Location | Maintainers | Number of Phases | Maximum current draw | ACNode fitting Location | MAC address | Status |
---|---|---|---|---|---|---|---|---|
Lulzbot | ? | 3D Printer Corner | ? | 1 | 5A | Inside the base | ? | In Service |
Myford lathe | ? | General workshop | Liam, AndyT | 1, | 13A max SSR | Toughened acnode | ? | Installed |
Lasercutter | ? | By the Window | Sol, Henry | 1 | Very little (interlock) | On the side | ? | In Service |
Shapeoko | ? | Robotics/CNC area | mentar, yopero, chris77uk | 1 | Very little, uses ATX PSU for 12V power | Inside electronics container | ? | Installed |
TIG welder | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | In Service |
MIG welder | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Needs wireless solution | ? | Proposed |
Grinding wheel 1 | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
Grinding wheel 2 | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
Donkey saw | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
Grinder | ? | Metal Shop | Dean, Liam, Mr Ed, | 1, | ? (can switch 24V low current. We have some relays) | Box on the wall. | ? | Proposed |
Frontdoorbot | ? | frontdoor | Jasper, Jasiek, ?!?! | n/a | n/a | buried in doorframe | 00:1A:B6:02:F3:FC | does not exist yet(?) |
Backdoorbot | ? | backdoor | Jasiek, Jasper ?!?!? | n/a | n/a | box next to door | 00:1A:B6:02:F3:F5 | In Service |
Back door | 999 but needs to change to 1 | backdoor | cepmender, Welshie | box in ground floor CNC room with gel cell battery backup, acnode-shield v1 | 00:1a:b6:03:03:47 | In service testing, bugs with acnode vlan? Configured for Normally Open solenoid | ||
Front door, actually for lift lobby to 1st floor | ? | frontdoor | Welshie | box to be installed in 1st floor comms room, gel cell battery backup, acnode-sheild v1 | ? | in construction, requires gel cell for battery backup. Configured for Normally Closed maglock |
Items in stock
- 0x Connected Launchpads
- 3x 40A SSRs
- 3x RFID Readers
- 0x RGB LED arcade buttons