Lulzbot Mini

Lulzbot 1 (Hull)
Model	Lulzbot Mini Standard Extruder
Sub-category	CNC
Status	Check the Tools Status Page
Last updated	13 August 2024 12:54:20
Consumables	XT filament
Accessories	Print removal knife
Training requirement	yes
Training link	https://wiki.london.hackspace.org.uk/view/Lulzbot_Mini_Training
ACnode	yes
Owner	Hackspace
Origin	Donation from Lulzbot
Location	3D printer area, Ground floor
Maintainers	cptPrime (Timour), tgreer (Thomas), James N

Hull

Hull is a Lulzbot Mini Standard.
Accessible via http://hull from inside the hackspace network.

Filament

Only use the provided XT filament.

Hull will theoretically print the follow filaments:

• PLA
• ABS
• XT
• Nylon

please contact the maintainers if you wish to use a filament that is not available.

There is no need to use Pritt Stick, or other adhesive, to get the print to adhere to the bed with rigid filament. Applying excessive Pritt Stick merely cakes the bed in gunk, making the first few layers of your print look messy and lumpy. If you find the bed like this, it can be cleaned off with a warm soapy sponge.

Cost

Using the printers costs £1.50/hour of printing + 50p/meter of filament. Octoprint gives you both of these.

Training

Training is required. There is a cost of £5 to be trained (waived if trained on the old printer), payable to the trainer.

Logging

All prints are to be logged via : http://goo.gl/forms/ARNWXexh7zXHSq8p1