Wood Lathe (Nova DVR XP)
A wood lathe for turning and shaping all kinds of round things in wood or similar materials
| Wood Lathe (Nova DVR XP) | |
|---|---|
.jpg) | |
| Model | Nova DVR XP |
| Sub-category | Woodworking |
| Status | Good working order |
| Last updated | 24 June 2024 14:44:57 |
| Training requirement | yes |
| ACnode | yes |
| Origin | Pledge |
| Location | Wood shop |
| Maintainers | Jonathan Hodgson |
Purchased for the space via pledge in February 2022, superseding the old Myford lathe
This is a lathe with a swivel head that will allow us to turn 16 inch pieces over the bed and 28 inches bowls with the outrigger. It has a 2.3hp motor and sophisticated drive electronics which make it not only more convenient (fullly variable speed control and reverse for sanding) but also smoother and safer (it will stop the spindle if it detects a chisel dig in).
Training is required
Risk Assessment - Wood Lathes
This risk assessment is intended to provide guidance on the risk associated with the above equipment and activities in normal use. Please also check general risk assessments for the space as a whole. Any discrepancies, errors or concerns should be raised with the document maintainers or trustees - do not edit this assessment directly. For responsible persons and last update, see 'version log' of the assessment page.
Activity
Turning wood or suitable plastics on the wood lathe
Signage
Understanding Risk Rating
LOW - Ensure current control measures are in place and continue with activity
MED - Control measures may be adequate, co-supervision is recommended
HIGH - Do not undertake activity without further consultation with area specialists
Risk Assessment
| Identify Hazards | Who May be Harmed and How | Severity | Control Measures | Likelihood | Risk Rating |
|---|---|---|---|---|---|
| Incompetent user | User, Bystander | HIGH | Users must not use tools that they are not competent to use. Members must challenge use that they believe is dangerous. Users should read the user manual where applicable. Users must read the risk assessment before using a tool. Users will be advised during induction which tools they will need supervision or an induction to use. | LOW | MED |
| Entanglement | User | HIGH | User must not wear gloves User must remove all jewellery. User must tie back hair User must not wear flowing clothes User must not touch the workpiece whilst the lathe is switched on. | Medium | Medium |
| Ejection of workpiece | User, Bystander | HIGH | User will test the workpiece is in the jaws or on drive centre securely. User will ensure that the centre of the workpiece is accurately marked and used to attach the workpiece. User will test the integrity and suitability of the workpiece for turning before use. | Low | Medium |
| Dust (inhalation) | User of the tool, users of the room, the space. | LOW | The lathe should be used with the dust extractor attached and working. Maintenance must include the cleaning of dust from within the lathe housing A respirator or mask should be used whilst operating this tool for prolonged periods | Low | Low |
| Noise | User of the tool, users of the room. | LOW | Ear protection is advised. | LOW | LOW |
| Flying wood chips | User of the tool, users of the room. | LOW | Eye protection must be worn whilst using the wood lathe Eye protection must be worn by all users of the workshop. | LOW | LOW |
