Difference between revisions of "Blasting Cabinet"
Jump to navigation
Jump to search
(adding a wiki page because nobody else has yet. If you have better instructions, please update this wiki.) |
(No difference)
|
Revision as of 17:22, 9 August 2020
| Blasting Cabinet | |
|---|---|
 | |
| Status | Good working order |
| Training requirement | no |
| ACnode | no |
| Owner | London Hackspace |
| Location | Cage |
- Disinfect inside of protective gloves before use and wash your hands before use. You don't know whose hands have been in there
- Apply power.
- Switch light on (top right) so that you can see what you're doing
- Unlatch front panel
- Insert work piece
- Latch front panel.
- Connect to compressor (in the main metalwork workshop)
- Little tool just blows air
- Big tool blows air and sand. Foot switch activates.
- Try not to blast the protective gloves, they will wear out quicker if you do, and you don't want to be the person to find out they're no longer offering protection.
- Disconnect power
- Disconnect air line
When disconnecting airline tools under pressure, you can expect them to pop. Be prepared for the connectors to come apart with gusto.
- Tidy air line.
- Remove work piece and admire it's rust-free state.
- Disinfect inside of protective gloves after use. We don't know where your hands have been.
- Now wash your hands