Difference between revisions of "Equipment/12inch Chester Multiformer"
m (fix typos) |
m |
||
| Line 1: | Line 1: | ||
| − | + | {{EquipmentInfobox | |
| + | | name = Multiformer <!-- Name of the item. --> | ||
| + | | image = Multiformer.JPG <!-- Image of the item. Leave with placeholder image if none exists. --> | ||
| + | | model = Chester 12" <!-- Model --> | ||
| + | | category = Equipment <!-- Main category. Please leave alone to keep item in this category --> | ||
| + | | subcat = Metalworking <!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one --> | ||
| + | | status = Unknown <!-- Set to one of; Good working order, Faulty, Out of order, Under construction, Out of consumables, Scrapped, or Unknown --> | ||
| + | | consumables = Unknown <!-- Any items used up in normal operation, such as; ink, paper, saw-blades, cutting disks, oil, etc.. --> | ||
| + | | accessories = Unknown <!-- Any items associated with the equipment but not consumable, such as; drill bits, safety gloves, goggles, etc.. --> | ||
| + | | reqtraining = Unknown <!-- Is training required to use this equipment? Yes or no. --> | ||
| + | | trainlink = Unknown <!-- If training is required, provide a link to training signup or contact page. Otherwise leave blank. --> | ||
| + | | acnode = No <!-- Is the equipment ACnode locked? --> | ||
| + | | owner = Nigle <!-- Provide a link to owners members page if other than LHS --> | ||
| + | | origin = Unknown <!-- If via pledge, please link to the completed pledge page on the wiki --> | ||
| + | | location = Unknown <!-- Floor, room/zone and location within that area --> | ||
| + | | maintainers = Unknown <!-- If someone is nominated as managing the upkeep of this item, please list them here. No links please; it currently breaks the template. --> | ||
| + | | template_ver = 1.1 <!-- Please do not change. Used for tracking out-of-date templates --> | ||
| + | }} | ||
| + | =Description= | ||
A 12" multiformer. This tool can slice mild steel sheet, bend steel sheet into curves and make 90degree bends. The manual calls it a shear, brake and roll machine. | A 12" multiformer. This tool can slice mild steel sheet, bend steel sheet into curves and make 90degree bends. The manual calls it a shear, brake and roll machine. | ||
| Line 7: | Line 25: | ||
[[File:Multiformer_manual_3-1N-1_305MM.pdf|Multiformer manual]] | [[File:Multiformer_manual_3-1N-1_305MM.pdf|Multiformer manual]] | ||
| − | This tool is on | + | This tool is on loan from Nigle. |
It is a relatively cheap Chinese import, supplied by Chester UK. | It is a relatively cheap Chinese import, supplied by Chester UK. | ||
| Line 15: | Line 33: | ||
We broke the original machine by being rough with it while trying to cut a hard metal plate. | We broke the original machine by being rough with it while trying to cut a hard metal plate. | ||
| + | =Specification & documentation= | ||
| + | Model 12" | ||
| + | Bed Width 305mm | ||
| + | Shearing Thickness (Steel) 0.6mm | ||
| + | Bending Thickness 1mm | ||
| + | Bending Angle 90 deg | ||
| + | Rolling Thickness 1mm | ||
| + | Min. Rolling Diameter 39mm | ||
| + | Net Weight 45Kg | ||
| + | |||
| + | =Training & instruction= | ||
The instruction manual and the label on the back says it can shear 1mm thick mild steel plate, however the suppliers webpage says 0.6mm maximum. This seems like a hint that 1mm thick plate is pushing it. | The instruction manual and the label on the back says it can shear 1mm thick mild steel plate, however the suppliers webpage says 0.6mm maximum. This seems like a hint that 1mm thick plate is pushing it. | ||
| Line 28: | Line 57: | ||
All the machinery in the space should only be used after appropriate training. | All the machinery in the space should only be used after appropriate training. | ||
| − | + | ==Usage notes== | |
| + | ==Consumables== | ||
| + | If using any consumables, link here to recommended providers or current pledges to purchace. | ||
| + | =Log= | ||
| + | =Links= | ||
[http://www.chesteruk.net/products/detail/698 Chester page about this machine] | [http://www.chesteruk.net/products/detail/698 Chester page about this machine] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 14:22, 29 May 2013
| Multiformer | |
|---|---|
 | |
| Model | Chester 12" |
| Sub-category | Metalworking |
| Status | Unknown |
| Last updated | 14 December 2022 08:41:51 |
| Consumables | Unknown |
| Accessories | Unknown |
| Training requirement | Unknown |
| Training link | Unknown |
| ACnode | No |
| Owner | Nigle |
| Origin | Unknown |
| Location | Unknown |
| Maintainers | Unknown |
Description
A 12" multiformer. This tool can slice mild steel sheet, bend steel sheet into curves and make 90degree bends. The manual calls it a shear, brake and roll machine.
December 2012, Cepmender reports that one of the side castings has cracked and he is discussing the matter with Chester.
File:Multiformer manual 3-1N-1 305MM.pdf
This tool is on loan from Nigle.
It is a relatively cheap Chinese import, supplied by Chester UK.
This machine is only for use with relatively soft metal sheet, PCB material or maybe cutting thin flexible plastic sheet. As a rule of thumb, if your metal isn't slightly flexible in your hands it is too hard for this machine.
We broke the original machine by being rough with it while trying to cut a hard metal plate.
Specification & documentation
Model 12" Bed Width 305mm Shearing Thickness (Steel) 0.6mm Bending Thickness 1mm Bending Angle 90 deg Rolling Thickness 1mm Min. Rolling Diameter 39mm Net Weight 45Kg
Training & instruction
The instruction manual and the label on the back says it can shear 1mm thick mild steel plate, however the suppliers webpage says 0.6mm maximum. This seems like a hint that 1mm thick plate is pushing it.
The original machine was sucessfully used to cut 0.8mm mild steel sheet and put 90degree bends in it to make a lid for a vectorscope.
This machine is heavier than it looks. You could break your toes and the machine if you drop it. You could cut or pinch your fingers if you stick them in it.
It should be have a label saying WARNING THIS IS SURPRINGLY HEAVY on it.
It should be bolted down to a base.
All the machinery in the space should only be used after appropriate training.
Usage notes
Consumables
If using any consumables, link here to recommended providers or current pledges to purchace.