Equipment/Liebert-GXT2-UPS

From London Hackspace Wiki
< Equipment
Revision as of 08:15, 8 June 2013 by JasperWallace (talk | contribs) (start)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Intro

This is the large UPS with the noisy fan next to the rack in the basement.

It currently provides backup power for boole and the switch downstairs.

Unfortunatly it's not supported by the net ups tools:


TODO

  • The 2 FTTC modems need to be powered by the ups.
  • The power to the rack in the quiet room comes downstairs by the riser to the left of the ground floor fire door to the common area, the power cables should be detached from the main distro panel and feed back to the rack in the basement, there is enough slack for that to happen.
  • Need to check that Backdoorbot will all run properly from POE.
  • What do we do with frontdoorbot? (If there is a power outage we can't close or open the roller shutter anyway!)

Final setup

Both the power to the rack upstairs and the important things in the rack downstairs are on the ups. Backdoorbot will be protected from power outages since it if running off of POE. Wifi will work since it runs off of POE.