Equipment/Kiln Carbolite - High Temp: Difference between revisions

Latest revision as of 08:44, 14 December 2022

This kiln was taken away by Dean Forbes in Dec 2022

Below are the contents of this page before its removal:

A metalworking kiln with various applications in heat-treating, light forging or casting of metals

No training requirement, but please seek advice from other metalshop users if you are unfamiliar with its use

This one is the larger of hackspace's two kilns so can heat bigger workpieces, but doesn't have as high a maximum temperature as the QMUL kiln

It also has a much simpler control system compared to the QMUL

Not suitable for ceramics

@@ Line 1: / Line 1: @@
 {{EquipmentInfobox
-|name=Kiln Carbolite - High Temp
+|name=Kiln (Carbolite)
-|image=Hackspace_Unknown.png
+|image=Carbolite Kiln.jpg
 |category=Equipment
-|subcat=Metalworking<!-- Sub-category if one exists. Please check main listing to see other categories contained within the main one -->
+|subcat=Defunct
-|status=Faulty
+|status=Defunct
-|reqtraining=no
+|reqtraining= no
-|owner=Michael , Dean
+|acnode=no
+|origin= Michael, Dean
+|owner= Dean
+|maintainers=Machine Shop Team
 |location=Cage
 }}
-mainly used by knife makers
-needs work: control wiring needs to be sorted,  some one pulled them out so that needs to be repaired, The controller should be checked and a guide to controller put together.
+This kiln was taken away by Dean Forbes in Dec 2022
+Below are the contents of this page before its removal:
+----------------------------------------------------------
+* *out of order - electrically dangerous*
+A metalworking kiln with various applications in heat-treating, light forging or casting of metals
+No training requirement, but please seek advice from other metalshop users if you are unfamiliar with its use
+This one is the larger of hackspace's two kilns so can heat bigger workpieces, but doesn't have as high a maximum temperature as the [[Equipment/Kiln-2|QMUL kiln]]
+It also has a much simpler control system compared to the QMUL
+Not suitable for ceramics